Studer Innotec C 1600-12 Summary, General Information, Introduction, Assembly, Operating

STUDER INNOTEC COMPACT

Summary

1	GENERAL INFORMATION			4
	1.1	OPERATING INSTRUCTIONS		4
	1.2	QUALITY AND WARRANTY		4
	1.3	WARRANTY DISCLAIMER		4
	1.4	LIABILITY DISCLAIMER		4
	1.5	PRECAUTIONS….......................................................................................................................................4
	1.6	SPECIAL PRECAUTIONS		5
2	INTRODUCTION			6
	2.1	PRINCIPLE SCHEMATIC		6
	2.2	DESCRIPTION OF MAIN FUNCTIONS		6
	2.2.1		THE INVERTER	6
	2.2.2 THE TRANSFER SYSTEM			6
	2.2.3 THE BATTERY CHARGER			6
	2.2.4 THE SOLAR CHARGE CONTROLLER (OPTIONAL)			7
	2.2.5		REMOTE CONTROL	7
	2.3	BATTERY CONNECTIONS		7
	2.3.1 PARALLEL CONNECTION			7
	2.3.2 SERIES CONNECTION			7
	2.3.3 PARALLEL- SERIES CONNECTION			8
3	ASSEMBLY			8
	3.1	PLACE OF ASSEMBLY		8
	3.2	FIXING………….. .....................................................................................................................................8
	3.2.1		COMPACT	8
	3.2.2		PROTECTION COVER IP23	8
	3.3	CONNECTION .…………………………………………………………………………………………………….8
	3.3.1 GENERAL INSTRUCTIONS ON CONNECTING			8
	3.3.2 PROTECTION COVER FOR THE TERMINALS CONNECTIONS			9
	3.4	CONNECTING PLAN / FRONT SIDE		9
	3.5	CABLING/WIRING		10
	3.5.1		PRE-INSTALLATION SETTINGS	10
	3.5.2		CONNECTION TO BATTERY	10
	3.5.3 CONNECTION THE 230VAC-CONSUMERDEVICE (AC OUTPUT)			10
	3.5.4 CONNECTION THE 230VAC INPUT (AC INPUT)			11
	3.5.5 CONNECT THE SOLARMODULES: SOLAR +/- (ONLY FOR SOLAR OPTION)			11
	3.5.6 CONNECTION TO AUXILIARY CONTACT			11
	3.5.7 CONNECTION TO REMOTE CONTROL			11
	3.5.8 CONNECTION TO TEMPERATURE SENSOR (TEMP.)			11
4	OPERATING			12
	4.1	DISPLAY AND OPERATING CONTROL ELEMENTS .......…………………………………….…………………….12
	4.2	LIGHT EMITTING DIODES		12
	4.3	PUSH BUTTONS…		13
	4.4	TURNING KNOBS		13
	4.5	THE INVERTER…. ...................................................................................................................................14
	4.5.1 CHARGE DETECTION SYSTEM „STANDBY“			14
	4.5.2		OVERLOAD	14
	4.5.3		OVERHEATING (OVER TEMP)	14
	4.5.4		BATTERY CONDITION	14
	4.6	THE BATTERY CHARGER		15
	4.6.1 CYCLE OF CHARGE			15
	4.6.2		EQUALIZATION CHARGING	15
	4.6.3 INPUT CURRENT REPARTITION (POWER SHARING)			15
	4.6.4		CHARGING CURRENT	16
	4.6.5		BATTERY CONDITION	16
	4.7	THE TRANSFER SYSTEM		16
	4.7.1 SET THE TRANSFER VOLTAGE THRESHOLD			17
	4.7.2 FAST (UPS)- MODE FOR THE TRANSFER SWITCH			17

User manual COMPACT V4.0 E 2