Post Rack Mounting | Tripp Lite BP Series specs

Rack Installation

Read Important Safety Instructions Section Before Installation

Note: The user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for the application, contact the manufacturer of the rack or rack enclosure for assistance. The procedures described in this manual are for common rack and rack enclosure types and may not be appropriate for all applications.

Internal Battery Removal

DANGER! LETHAL HIGH VOLTAGE HAZARD!

Potentially lethal high voltage exists within the battery pack, even when it is not connected to a UPS system. Internal battery removal/replacement should be performed by qualified electricians or service personnel only, following all local electrical codes and the precautions listed in this manual.

Due to the weight of the 4U external battery pack, Tripp Lite recommends disconnecting and removing the internal batteries from the battery pack prior to rack installation. After the battery pack has been installed in the rack, the batteries must be reinserted and reconnected before connecting the battery pack to the UPS system. The battery removal process will be reversed during battery insertion, so taking notes during removal may be helpful.

1Unscrew and remove Battery Pack Front Panel and Battery Cover Plate

2Disconnect Internal Batteries

(4 Sets of Red/Black Connectors)

3Remove Internal Batteries

(Slide From Battery Pack Cabinet)

4-Post Rack Mounting

WARNING!

The included mounting shelves will not support more than one battery pack. Do not attempt to stack multiple battery packs on a single set of mounting shelves. Do not attempt to install the battery pack in a 2-post rack. Failure to follow these warnings will create a risk of equipment damage and personal injury.

The 4U battery pack includes the hardware needed for mounting in a 4-post rack or rack enclosure, including an adjustable rackmount shelf kit that provides additional support (required). Note: The 4U battery pack should be mounted below the UPS system power module, as low in the rack as possible.

4Connect the two segments of each shelf A using the included screws and nuts B . Leave the screws slightly loose so the shelves can be adjusted in the next step.

5Adjust each shelf to fit the rack, then mount the shelves in the lowest available space of the rack with the screws, nuts and washers provided C . The support ledges should face inward. Tighten the screws that connect the shelf segments D .

	A
4	B
4
	7
C	D
5

Attach the mounting brackets E to the forward mounting holes F of the battery pack cabinet with

the screws provided G . The mounting bracket “ears” should face forward.

With the help of one or more assistants, lift the battery pack cabinet and slide it onto the mounting shelves. Attach the battery pack cabinet to the rack by inserting the appropriate hardware

Hthrough the mounting bracket “ears” and into the rack rails.

BP Series specifications

Tripp Lite, a trusted name in power protection and connectivity solutions, offers the BP Series of uninterruptible power supplies (UPS) designed to provide reliable power protection for various electronic devices. These UPS systems are particularly beneficial for small to medium-sized businesses, home offices, and critical home electronics.

One of the main features of the BP Series is its innovative line-interactive technology. This technology allows the UPS to automatically regulate voltage fluctuations, ensuring that connected equipment receives consistent power. It can provide battery backup during power outages, giving users the peace of mind that their devices will remain operational during critical moments.

Another standout characteristic of the BP Series is its smart battery management system. This system utilizes advanced techniques for battery charging and discharging, promoting longer battery life and optimizing performance. Users will find that the BP Series supports hot-swappable batteries, which allows for easy replacement without the need to power down connected devices.

The BP Series is designed with multiple outlets, providing versatility to accommodate various devices. With universal NEMA outlets available, users can connect computers, networking equipment, and other electronics without needing special adapters. Additionally, some models in the series include USB charging ports, enhancing convenience for charging smartphones and tablets directly from the UPS.

In terms of monitoring and management, Tripp Lite's BP Series offers a series of LED indicators that provide real-time status updates, making it easy for users to assess the health and performance of their UPS at a glance. More advanced models in the series may come equipped with USB ports and compatible software for detailed monitoring and control options through a computer interface.

The BP Series is built with durable, high-quality engineering, ensuring that it can withstand everyday use while providing reliable service. Safety features such as surge protection and short-circuit protection are integral to the design, shielding connected devices from power surges, spikes, and other electrical anomalies.

Overall, Tripp Lite's BP Series combines robust performance, essential features, and user-friendly design to deliver dependable power protection, making it an excellent choice for anyone seeking to safeguard electronics against power disturbances. Whether it's for personal or professional use, this series offers admirable value and performance tailored to a range of power needs.