Tripp Lite APS PowerVerter warranty Switches, Indicator Lights Other Features

Page 10

Set Operating Mode Switch continued

•Switch to “CHARGE ONLY” when you are not using connected equipment. (WARNING! APS will not provide battery backup!) ADVANTAGES: A) Continues to charge battery when power is present, and B) Turns OFF the APS’s inverter, preventing battery drain during blackouts or brownouts.

•Switch to “OFF” to completely turn off the APS and connected equipment or to reset the APS after it has shut down due to overload or overheating.

Switches, Indicator Lights

& Other Features

(See Diagram 9, p. 35 to locate the following switches, indicator lights and other features.)

Switches

1. Operating Mode Switch (All models)

This switch selects the APS operating mode (either “AUTO/REMOTE”, “OFF” or “CHARGE ONLY”). See “Set Operating Mode Switch”, pg. 10 to select the optimum setting for this switch.

2. “CONFIGURATION SWITCHES”—DIP Switch Group A (All models)

These four switches must be set for the type of battery your APS will be connected to and the voltage points at which your APS will switch to battery power. See “Configuration”, pg. 5 to select the optimum settings for these switches.

3. “CONFIGURATION SWITCHES”—DIP Switch Group B (Select models only)

These DIP Switches allow you to equalize the internal resistance of your battery's cells and set the percentage of your model's maximum load at which the APS will limit battery charging. See “Configuration”, pg. 7 to select the optimum settings for these switches.

Indicator Lights

4. “LINE” (All models)

This green light will turn continuously ON whenever connected equipment is receiving utility-supplied AC power and your APS is set to “AUTO/REMOTE”, meaning that it will provide battery backup if utility power fails. It will flash intermittently when connected equipment is receiving utility power and your APS's Operating Mode Switch is set to “CHARGE ONLY” to warn you that the APS's inverter is OFF and that the APS WILL NOT provide battery backup during blackouts, brownouts or overvoltages.

5. “INV” (Inverting—all models)

This yellow light will turn continuously ON whenever connected equipment is receiving battery- supplied AC power (during a blackout, brownout or overvoltage while connected to utility power or when connected to batteries during vehicular operation).

6. “LOAD” (All models)

This red light will turn continuously ON when the APS’s load is between 80% and 110% of capacity. The light will flash intermittently when the APS's inverter shuts down due to a severe overload or overheating. If this happens, turn Operating Mode Switch OFF. Remove the overload and let the unit cool. You may then turn the APS ON after it cools.

7. “CUT/BOOST” (VR models only)

These lights will turn ON whenever your APS is automatically correcting high (CUT) or low (BOOST) AC line voltage. This is a normal, automatic operation of your APS that does not drain battery power, and no action is required on your part.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents APS PowerVerter Configuration & Connection pIntroduction Load Sharing Select models only Advanced, 3-Stage Battery ChargerVoltage Regulation Select models only Frequency-Controlled Inverter OutputAPS Location Warnings SafetyBattery Connection Warnings Equipment Connection WarningsConfiguration Disable Battery Charger APS 2448 only Equalize Battery ChargeLoad Sharing Selecting Battery Type Battery SelectionLimit Battery Charger APS 1012 and APS 2012 only Selecting Battery Amp Hour CapacitySee Diagram 2, p Battery Connection StandardBattery Connection DC Vehicular Mounting OptionalAC Connection Hardwired Electrical ConnectionsSet Operating Mode Switch AC Input Electrical ConnectionSwitches Switches, Indicator Lights Other FeaturesIndicator Lights Other Features Maintenance Maintenance & ServiceLimited Warranty ServiceTroubleshooting Symptom Problems CorrectionsSpecifications Corded Models InverterSpecifications Hardwired Models Configuración y Conexión p Introducción Compartición de Carga Modelos selectos solamente Cargador Avanzado De 3 Etapas para BateríasRegulación Automática de Voltaje Modelos Selectos Solamente Inversor con Salida de Frecuencia ControladaPrecauciones Sobre la Conexión de Baterías SeguridadPrecauciones Sobre la Ubicación del APS Precauciones Sobre la Conexión de EquiposSeleccione el Tipo de Baterías ConfiguraciónGrupo B DE Interruptores DIP Modelos Selectos Compartición de Carga Seleccione la Capacidad en Amperios/Hora de las Baterías Selección de BateríasPaso Montaje Opcional Escoja la configuración apropiada a sus bateríasRefiérase al diagrama 2, página Conexión de Baterías EstándarConexión de CA Conexión de Baterías DC VehículosConexiones Eléctricas Directas al Circuito Conexión de la Salida Eléctrica de CA Regule el Interruptor Operating Mode Modo de OperaciónInterruptor Operating Mode Modo de operación InterruptoresLuces Indicadoras Mantenimiento Otras CaracterísticasServicio Servicio en México Garantía LimitadaResolucion de Problemas Especificaciones Modelos con cable Especificaciones Modelos con toma directa al circuito Diagrams/Esquemas APS 12V Battery HI/MED/LO Th Street Chicago, IL 60609 USA Customer Support 773

APS PowerVerter specifications

Tripp Lite, a key player in the field of power products, offers the APS PowerVerter series, which is designed to deliver reliable and convenient portable power solutions. The APS series includes inverter/chargers aimed at providing backup power to a variety of devices and applications.

One of the standout features of the Tripp Lite APS PowerVerter is its pure sine wave output. This technology is crucial for users who need a stable and clean power source, especially for sensitive electronics like laptops, medical equipment, and home appliances. Pure sine wave inverters ensure that devices operate smoothly without the risk of damage or malfunction, making them ideal for both recreational and professional use.

The APS PowerVerter series offers a compact and lightweight design, enhancing portability. Users can easily transport these inverters for use in RVs, boats, or remote job sites. The robust construction ensures durability, suited for outdoor environments where reliability is paramount.

Incorporating advanced safety features is another hallmark of the APS PowerVerter. These inverters are equipped with various protection mechanisms like overload protection, short circuit protection, and thermal shutdown. These features ensure that both the inverter and connected devices remain safe during operation, contributing to a peace of mind for users.

The system also includes a built-in charger, an advantageous feature that enables users to charge the connected batteries while simultaneously using the inverter's output power. This dual-function capability is particularly useful for those who require continuous power supply and may need to switch between battery and AC power seamlessly.

Tripp Lite's APS series also supports various input and output options, including multiple AC outlets, alongside USB ports for charging mobile devices. This flexibility allows users to connect a broad range of applications, from office equipment to recreational gear.

Overall, the Tripp Lite APS PowerVerter exemplifies reliability, versatility, and safety in portable power solutions. Its combination of pure sine wave technology, compact design, safety features, and dual charging functionality makes it an excellent choice for individuals seeking uninterrupted power in a variety of settings. Whether for outdoor adventures, emergency backup, or professional usage, the APS PowerVerter meets diverse power needs with assurance and efficiency.
Top Page Image Contents