Maintaining Your X-Bench, Maintenance, Wedge

15. Universal Insert Plate:

a. A blank insert plate is provided with the X-Bench. This area is meant to be used only with the Skil insert plate technology which is sold separately. The insert plates which can be purchased separately are a jigsaw insert plate, sander insert plate, router insert plate and a drill press insert plate.

!WARNING Use only X-Bench inserts and dedicated tools. Any others may cause loss of control and

personal injury.

Maintaining Your X-Bench

Maintenance

Certain cleaning agents and solvents can ! CAUTION damage plastic parts. Some of these are:

gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents which contain ammonia. Avoiding use of these and other types of cleaning agents will minimize the possibility of damage.

!All repairs, electrical or mechanical, should WARNING be attempted only by trained repairmen.

Contact the nearest Factory Service Center or Authorized Service Station or other competent repair service. Use only identical replacement parts, any other may create a hazard.

!WARNING Never place dogs on opposite sides of cut channel. Support must be on one side of table.

Cutting Suggestions

Fig. 28

2" x 10" 1" x 12"

2" x 8" 1" x 10"

2" x 6" 1" x 8"

2" x 4" 1" x 6"

1" x 4"

Wedge	Wedge
Dog 1	Dog 2

10.