Industry Automation and Drive Technologies - SCE
4.2Configuring the Hardware
6.With a double click, open the configuration tool for the ’Hardware’. (→ Hardware)
7. Open the hardware catalog by clicking on the symbol '
’. (→ 
)
Insert the ’Mounting Channel’ with a double click (→ SIMATIC 300 →
→Mounting Channel).
Note:
Then, a configuration table is displayed automatically for setting up Rack 0.
TIA Training Document | Page 15 of 47 | Module |
E12 |
|
|
Status: 01/2010 | Vision Sensor Shape Check with SIMATIC | |