Harbor Freight Tools 67847 operating instructions Symbology, 120 V~ 3-Prong Plug and Outlet

Page 7

fit the outlet, have a proper outlet installed by a qualified electrician.

110-120 V~ Grounded

Compressors: Compressors with

Three Prong Plugs

1.In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This compressor is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

2.Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

3.Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

4.Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded.

5.Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the compressor’s plug.

6.Repair or replace damaged or worn cord immediately.

Grounding

Pin

120 V~ 3-Prong Plug and Outlet

(for up to 120 V~ and up to 15.5 A)

7.This compressor is intended for use on a circuit that has an outlet that looks like the one illustrated above in 120 V~ 3-Prong Plug and Outlet. The compressor has a grounding plug that looks like the plug illustrated above in 120 V~ 3-Prong Plug and Outlet.

8.The outlet must be properly installed and grounded in accordance with all codes and ordinances.

9.Do not use an adapter to connect this compressor to a different outlet.

 

 

 

 

 

 

Symbology

 

Canadian Standards Association

 

 

 

 

V~

Volts Alternating Current

A

Amperes

 

 

 

 

 

n0 xxxx/min.

No Load Revolutions per Minute

(RPM)

SKU 67847

For technical questions, please call 1-800-444-3353.

Page 7

Image 7
Contents Model For technical questions or replacement parts, please callContents Save This Manual General Compressor SafetyMatching outlets will reduce risk of electric shock 25’ 50’ 100’ 150’ Air Compressor Safety WarningsGrounding 120 V~ 3-Prong Plug and Outlet SymbologyFunctions SpecificationsUnpacking Instructions for putting into useAssembly/Mounting Work Piece and Work Area Set UpChecking the Oil Sample Air Line SetupCold Weather Operation General Operating InstructionsSKU For technical questions, please call Automatic Shut off System Emergency DepressurizationCleaning, Maintenance, Lubrication Maintenance ServicingOil Maintenance Maintenance ScheduleDraining Moisture from the Tank Air Filter MaintenanceProblem Possible Causes Likely Solutions Cord, or eliminate extension cord. See Recommended Part Description Qty Parts ListAssembly Diagram Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Limited 1 year / 90 day Warranty