Figure a

SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS

1.GROUND THIS PRODUCT. The electrical power cord for this product is equipped with a grounded 3-Prong Plug. Never remove the grounding prong or modify the Plug in any way. Do not use adapter plugs with this product. To comply with the National Electric Code, and to provide additional protection from the risk of electrical shock, the Table Saw should only be connected to a 110 Volt, 3 prong electrical outlet that is protected by a Ground Fault Circuit Interrupter (GFCI).

2.MAKE SURE THE POWER SWITCH (part #8E) IS IN THE “OFF” POSITION BEFORE PLUGGING IN THE POWER CORD (part #8F).

3.DO NOT ABUSE THE POWER CORD. Do not use the Power Cord (part #8F) to pull the 3-prong plug from a power outlet. Keep cord away from heat, oil, sharp edges, and moving parts. Replace damaged cord immediately. Route the power cord safely. Protect it from being damaged by other equipment in the shop. Do not route the cord where it can be walked on or tripped over.

4.IF YOU USE AN EXTENSION CORD, MAKE SURE TO USE ONLY UL APPROVED CORDS HAVING THE CORRECT GAUGE AND LENGTH. (SEE FIGURE A.)

5.MAINTAIN A SAFE WORK ENVIRONMENT. Do not use this product in or near damp or wet areas. Do not expose this product to rain. Keep the work area well lit. Make sure there is adequate surrounding workspace. Use this product in a well ventilated area. Do not operate this product in the presence of flammable liquids, gases, or dust. To avoid accidental electric shock, do not let your body come in contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.

6.DO NOT FORCE THE EQUIPMENT. This Table Saw will do the work better and safer at the speed and capacity for which it was designed.

SKU 46813

PAGE 4