Charging a Lithium Pack

CHARGING

With the selection arrow on the CHG line, select the correct charge rate and maximum cell/peak voltage for the battery being charged, then press and hold the

In the flow chart below, we have shown an example of how to charge a 2S (7.4V) 2200mAh LiPo pack at 2.2A.

Press and hold the Enter button for 2 seconds to start charging.

11]LiPo	2S	2200mAh	[ LiPo ] CHARGE
CHG. : 2.2A 4.20V/C
DCHG. :	2.2A	3.0V/C	* BATTERY *

***CHECK ***

0]NiMH 6S 3300mAh ENTER  0]NiMH 6S 3300mAh

CHG. : 3.3A 5mV/C5mV/CCHG. : 3.3ASTORE MODE START

DCHG.	:	5.0A	0.8V/C	DCHG.	:	5.0A	0.8V/C
CYCLE	:	CD	1X 10m	CYCLE	:	CD	1X 10m

Press the ‘Inc’ or

‘Dec’ button to change the cell number.

C-TCS:	15%	0:00:12
CAPACITY	:	10mAh	Mode
VOLTAGE	:	7.612V
CURRENT	:	2.20A

0]NiMH 6S 3300mAh

CHG. : 3.3A		5mV/C
DCHG. :	5.0A	0.8V/C	ESC
CYCLE :	CD	1X 10m

C-TCS: 15% 0:01:25

INPUT VOLT : 14.222V

PEAK VOLT : 7.612V

AVG. VOLT : 0.000V

0]NiMH 6S 3300mAh CHG. : 3.3A 5mV/C DCHG. : 5.0A 0.8V/C

CYCLE : CD 1X 10m

Mode

ESC

C-TCS: 15% 0:02:59

BAT. TEMP. : 22.1°C

PEAK TEMP. : 22.1°C

BATTERY RES: 30mΩ

 0]NiMH 6S 3300mAh CHG. : 3.3A 5mV/C DCHG. : 5.0A 0.8V/C

CYCLE : CD 1X 10m

2S= 7.687V 1S=3.845V

Mode 213.84V 13.84V 5mV

0]NiMH 6S 3300mAh

CHG. : 3.3A		5mV/C
ESC DCHG. :	5.0A	0.8V/C
CYCLE :	CD	1X 10m

ESC

STOP

CHARGE

Press and hold the ‘ESC’ button for 2 seconds to stop the charge.

With the line selection arrow on the ‘CHG.’ line, check the correct charge current and cell voltage is selected, then press and hold the ‘Enter’ button for 2 seconds to start the charge.

As shown in the flow chart above, pressing the ‘Mode’ or ‘Esc’ buttons at any stage whilst charging moves through the different screens giving detailed information about the charge.

Pressing the ‘Esc’ button for 2 seconds at any stage will stop the charge.