Fusion L702B operating instructions Error Messages, Safety Precautions

Page 16

ERROR MESSAGES

The Emperor L702B Pro has a number of error and warning messages that are designed to advise the user of any problems.

When applicable, pressing the ‘Esc’ button clears the message.

SAFETY PRECAUTIONS

DO NOT attempt to charge incompatible types of rechargeable batteries. This charger is designed to only charge and discharge Nickel-Cadmium, Nickel-Metal Hydride, Lithium-Ion, Lithium-Polymer, LiFePO4 and Lead-Acid batteries.

Make sure you place the charger on a firm level surface for charging.

DO NOT attempt to charge batteries at excessive fast charge currents. Check with your battery manufacturer for the maximum charge rate applicable to your battery.

DO NOT use automotive type battery chargers to power the charger.

DO NOT leave the charger unattended while charging. Disconnect the battery and remove input power from charger immediately if the charger becomes hot. Allow the charger or battery to cool down before reconnecting.

DO NOT allow water, moisture or foreign objects into the charger.

DO NOT place the battery or charger on or near a flammable object while in use. Keep away from carpets, cluttered workbenches, etc.

DO NOT cover the air intake holes on the charger as this could cause the charger to overheat.

Connect the charge lead to the charger BEFORE connecting to the battery.

DO NOT disassemble the charger.

This unit is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use it safely.

Young children should be supervised to ensure that they do not play with the charger.

DO NOT attempt to charge non-rechargeable batteries.

15

Image 16
Contents Emperor L702B Pro Contents Specifications Mode Type SpecOutput Battery Connections General OperationTurning on & Setting the Input Power DisplayMenu Structure Cycle CDBattery Memory Screen Lithium Functions and Parameters Charge Rate 2C TCS Capacity 90%CUT.TEMPER. CUT-OFF Temperature NICD/NIMH Functions and Parameters Trickle Charge Rate Cut-off if maximum Time is reachedCycle Charging Charging a Lithium PackCharging a NICD/NIMH Pack CycleUser Settings Screen Other ScreensData View Screen Cycle ViewBalancer View Factory SettingsSystem Menu Error Messages Safety PrecautionsLithium ION/POLYMER Battery Safety Warnings Page Page Rev