In this example a ‘Normal’ charge is selected and then the ‘Enter’ button is pressed for 2 seconds to start the charge.
As shown in the flow chart, pressing the ‘Mode’ or ‘Esc’ buttons at any stage moves through the different screens giving detailed information about the charge.
Pressing the ‘Esc’ button for 2 seconds at any stage will stop the charge.
OTHER SCREENS
As shown in the flowchart below, the other screens are accessed using the ‘Mode’ and ‘Esc’ buttons.
Memory Screen | User Settings | Data View | Cycle View | Balancer View |
11]LiPo | 3S | 2200mAh |
|
|
|
| TEMP.MODE | : | °C |
|
|
| INPUT | VOLT: 13.200V | |||||||||
| CHG. | : 2.1A 4.20V/C | Mode |
|
|
| BUTTON SOUND : | ON | Mode |
|
|
| OUTPUT VOLT: 11.123V | ||||||||||
| DCHG. | :10.0A | 3.0V/C |
|
|
|
|
| FINISH SOUND : | 5sec |
|
|
|
| BAT. TEMP. : No.Sens | ||||||||
| STORE | MODE START |
|
|
|
|
| MELODY |
|
| : | 1 |
|
|
|
|
| PEAK TEMP. : | 0.0°C | ||||
| 0]NiMH | 6S | 3300mAh |
|
|
|
|
|
| 0]NiMH | 6S | 3300mAh |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| 0]NiMH | 6S | 3300mAh | ||||||||||
| CHG. | : 3.3A | 5mV/C |
|
|
|
|
|
| CHG. | : 3.3A |
| 5mV/C |
|
|
|
|
| CHG. : 3.3A | 5mV/C | |||
| DCHG. | : 5.0A | 0.8V/C |
|
|
| ESC |
| DCHG. | : 5.0A | 0.8V/C |
|
| ESC |
| DCHG. : 5.0A | 0.8V/C | ||||||
|
|
|
|
|
|
|
| ||||||||||||||||
| CYCLE | : | CD | 1X 10m |
|
|
|
|
|
| CYCLE | : | CD |
| 1X 10m |
|
|
|
|
| CYCLE : CD | 1X 10m |
Mode | [ | 1 | ]CAPACITY | VOLTAGE | |
|
| C: | 0mAh | 0.000V |
D:0mAh 0.000V
0]NiMH 6S 3300mAh CHG. : 3.3A 5mV/C
ESC DCHG. : 5.0A 0.8V/C CYCLE : CD 1X 10m
Mode
ESC
3S=11.845V 1S=3.944V 33.95V 13.94V 8mV
0]NiMH 6S 3300mAh CHG. : 3.3A 5mV/C DCHG. : 5.0A 0.8V/C
CYCLE : CD 1X 10m
USER SETTINGS SCREEN
This screen is used to set the temerature mode and charger sounds for each charger channel. We recommend selecting a different melody for each channel (charger), so you can easily identify which channel has completed it’s operation.
TEMP.MODE | : | °C |
BUTTON SOUND : | ON | |
FINISH SOUND : | 5sec | |
MELODY | : | 1 |
0]NiMH 6S 3300mAh CHG. : 3.3A 5mV/C DCHG. : 5.0A 0.8V/C
CYCLE : CD 1X 10m
DATA VIEW SCREEN
The data view screen shows both the input and output voltages, together with the current and peak temperature readings for each channel.
INPUT VOLT: 13.200V OUTPUT VOLT: 11.123V BAT. TEMP. : No.Sens PEAK TEMP. : 0.0°C
0]NiMH 6S 3300mAh CHG. : 3.3A 5mV/C DCHG. : 5.0A 0.8V/C
CYCLE : CD 1X 10m
CYCLE VIEW
The cycle view screen shows the charge and discharge data for the most recent pack to be charged or discharged.
13
[ 1]CAPACITY VOLTAGE
C:0mAh 0.000V
D:0mAh 0.000V
0]NiMH 6S 3300mAh CHG. : 3.3A 5mV/C DCHG. : 5.0A 0.8V/C
CYCLE : CD 1X 10m