Fusion L50B PRO operating instructions Lithium Modes Li-Ion/Li-Po/Li-Fe, Setting Battery Capacity

Lithium Modes (Li-Ion/Li-Po/Li-Fe)

BATT TYPE	Lilo CHARGE 3.0A	INC
	C=3000mAh 10.8Vp
	ENTER

INC DEC

Lilo CHARGE 3.0A 10.8Vp

ENTER
INC	DEC
Lilo CHARGE 3.0A
C=3000mAh
ENTER
INC	DEC

Lilo CHARGE

C=3000mAh 10.8Vp

	START
BALANCER CON.		BALANCER CON.
NOT CONNECTED		CONNECTED

	Lithium Type
DEC	Lilo
	ENTER

Lithium Type

Lilo

DEC

INC

Lithium Type

LiPo

DEC

INC

Lithium Type

LiFe

BATTERY CHECK

WAIT PLEASE....

CHG 0:00 00000

LI + 3.00A 12.000V

This charger is capable of charging up to 6 cell Lithium-Ion, Lithium-Polymer or LiFePO4 batteries. It uses “constant current / constant voltage” regime in order to fully charge these Lithium batteries. Constant current is delivered during the fast charge. When the voltage of the Li-Ion, Li-Po battery and LiFePO4 reaches approx 4.1V, 4.2V, and 3.7V per cell respectively, the charger starts to change its charge method from “constant current” to “constant voltage”. The “constant voltage” allows the battery to dictate how much current the charger should deliver for safe, full charges. When the current drops below approx 1/10th current of the user selected battery capacity, the charger will stop charging as the battery is fully charged.

Lilo CHARGE 3.0A 10.8Vp

LiIon CHARGE 3.0A C=3000mAh

Setting Battery Capacity

Adjust the desired battery capacity from 100mAh to 6000mAh (50mAh per step) with the INC & DEC buttons. Press the ENTER button to confirm the setting.

Setting Battery Voltages For Li-Ion Battery Pack

Select the correct total battery voltage to be charged or discharged with the INC & DEC buttons – 3.6V, 7.2V, 10.8V,

14.4V and 18.0V [Vpack].

8