NiMH Mode

•If the other buttons are pressed, or nothing is pressed, the present battery type stops flashing.

•If the Battery TYPE button is pressed and briefly held, the recent & previous data will be shown until the Battery TYPE button is pressed.

•If the ENTER button is briefly pressed, a parameter which can be adjusted starts to flash and if the ENTER button is pressed again, the next parameter starts to flash. If nothing is pressed for 3 seconds, the parameter stops flashing.

•Once the ENTER button is pressed and briefly held, the charger starts to charge according to the selected parameters.

BATT TYPE	CHARGE	INC		NiMH delta-peak-
	C=3.0A		DEC	volt = 0mV/cell
	ENTER			ENTER

INC

DEC

NiMH CHARGE C=3

START

BATTERY CHECK

WAIT PLEASE....

CHG 0:00 00000 NC+3.00A 5.200V

INC

DEC

NiMH delta-peak- volt =

NiMH CHARGE C=3

Setting Charge Current

Adjust the desired charge current, which ranges from 0.1A to 6.0A with the INC & DEC buttons. Press the ENTER button to confirm the setting.

NiMH delta-peak- volt =

Setting Delta Peak Sensitivity

Set the Delta Peak Sensitivity from 5mV to 25mV per cell with the INC & DEC buttons and press the ENTER button to confirm the setting.