Porter-Cable 90550832, PC1800AL instruction

90550832 PC1800AlREVISED with pcxmvc charger added 4/27/09 8:14 AM Page 6

SYMBOLS

The label on your tool may include the following symbols. The symbols and their

definitions are as follows:
V		volts	A		amperes
Hz		hertz	W		watts
min		..............minutes	no		alternating current
		direct current			no load speed
		direct current			no load speed
	................	Class II Construction		................	earthing terminal
		Class II Construction
		(double insulated)
		(double insulated)
	..............	safety alert symbol	../minorrpm ....		revolutions or reciprocations
		safety alert symbol

per minute

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGERS

SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for battery chargers.

•Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.

WARNING: Shock hazard. Do not allow any liquid to get inside charger.

CAUTION: Burn hazard. To reduce the risk of injury, charge only designated Porter-Cablebatteries. Other types of batteries may burst causing personal injury and damage.

CAUTION: Under certain conditions, with the charger plugged in to the power supply, the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

•DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.

•These chargers are not intended for any uses other than charging designated Porter-Cablerechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution

•Do not expose charger to rain or snow.

•Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage to electric plug and cord.

•Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

•Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution.

•An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size.

•Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.

•Do not mount charger on wall or permanently affix charger to any surface. The charger is intended to use on a flat, stable surface (i.e., table top, bench top).

•Do not operate charger with damaged cord or plug — have them replaced immediately.

PC1800AL, 90550832 specifications

The Porter-Cable 90550832, also known as the PC1800AL, is an innovative product designed for both professionals and DIY enthusiasts alike. This versatile tool comes equipped with a host of main features, technologies, and characteristics that make it a reliable choice for various applications.

One of the standout features of the PC1800AL is its powerful 18V lithium-ion battery system, which provides long-lasting power and excellent performance. This battery technology ensures that users can work longer without the hassle of frequent recharging, a common issue with many cordless tools. The lithium-ion battery also has a low self-discharge rate, meaning it can hold its charge for extended periods, making it ideal for those infrequent jobs.

Another impressive aspect of the Porter-Cable 90550832 is its lightweight and ergonomic design. Weighing in at only a few pounds, it is easy to maneuver, reducing fatigue during prolonged usage. The rubber overmold grip adds another layer of comfort, allowing users to maintain a firm grip on the tool even in slippery conditions.

The PC1800AL is equipped with a 1/2-inch keyless chuck, enabling quick and easy bit changes without the need for extra tools. This feature saves time and increases efficiency, particularly for tasks that require frequent bit swaps. Additionally, the built-in LED work light provides illumination in dark settings, enhancing visibility and making it easier to work in tight spaces.

In terms of technology, the PC1800AL stands out with its advanced motor design. This motor delivers impressive torque, allowing users to drive screws and drill through various materials with ease. Whether working with wood, metal, or plastic, this tool can handle a wide range of tasks, making it a versatile addition to any toolbox.

Durability is another key characteristic of the Porter-Cable 90550832. Designed with rugged materials and a robust construction, this tool can withstand the rigors of demanding job sites. Its impact-resistant housing ensures it can endure bumps and drops, giving users confidence in their investment.

In summary, the Porter-Cable 90550832, PC1800AL, is a powerful, versatile, and user-friendly cordless tool that features an 18V lithium-ion battery, a lightweight design, a keyless chuck, and a durable build. Its blend of innovative technologies and essential characteristics makes it an excellent choice for both professionals and DIY enthusiasts looking to tackle a variety of projects with ease and efficiency.