HOT/COLD Pack Delay, Problem Power Line

90550832 PC1800AlREVISED with pcxmvc charger added 4/27/09 8:14 AM Page 9

HOT/COLD PACK DELAY

When the charger detects a battery that is excessively hot or excessively cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery has normalized. After this happens, the charger automatically switches to the Pack Charging mode. This feature ensures maximum battery life. The light flashes in the pattern indicated on the label.

PROBLEM POWER LINE

When the charger is used with some portable power sources such as generators or sources that convert DC to AC, the charger may temporarily suspend operation. The LED flashes in the pattern indicated on the label. This indicates that the power source is out of limits.

LEAVING THE BATTERY IN THE CHARGER

The charger and battery pack can be left connected with the LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged. This charger features an automatic tune-up mode which equals or balances the individual cells in the battery pack to allow it to function at peak capacity. Battery packs should be tuned up weekly or whenever the battery no longer delivers the same amount of work. To use the automatic tune-up mode, place the battery pack in the charger and leave it for at least 8 hours.

IMPORTANT CHARGING NOTES

1.Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

2.The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

3.If the battery pack does not charge properly:

a.Check current at receptacle by plugging in a lamp or other appliance

b.Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

c.Move charger and battery pack to a location where the surrounding air temperature is approximately 65°F - 75°F (18°- 24°C).

d.If charging problems persist, take the tool, battery pack and charger to your local service center.

4.The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also charge a partially used pack whenever you desire with no adverse affect on the battery pack.

5.Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

6.Do not freeze or immerse charger in water or any other liquid.

WARNING: Shock hazard. Do not allow any liquid to get inside

charger. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.

PC1800AL, 90550832 specifications

The Porter-Cable 90550832, also known as the PC1800AL, is an innovative product designed for both professionals and DIY enthusiasts alike. This versatile tool comes equipped with a host of main features, technologies, and characteristics that make it a reliable choice for various applications.

One of the standout features of the PC1800AL is its powerful 18V lithium-ion battery system, which provides long-lasting power and excellent performance. This battery technology ensures that users can work longer without the hassle of frequent recharging, a common issue with many cordless tools. The lithium-ion battery also has a low self-discharge rate, meaning it can hold its charge for extended periods, making it ideal for those infrequent jobs.

Another impressive aspect of the Porter-Cable 90550832 is its lightweight and ergonomic design. Weighing in at only a few pounds, it is easy to maneuver, reducing fatigue during prolonged usage. The rubber overmold grip adds another layer of comfort, allowing users to maintain a firm grip on the tool even in slippery conditions.

The PC1800AL is equipped with a 1/2-inch keyless chuck, enabling quick and easy bit changes without the need for extra tools. This feature saves time and increases efficiency, particularly for tasks that require frequent bit swaps. Additionally, the built-in LED work light provides illumination in dark settings, enhancing visibility and making it easier to work in tight spaces.

In terms of technology, the PC1800AL stands out with its advanced motor design. This motor delivers impressive torque, allowing users to drive screws and drill through various materials with ease. Whether working with wood, metal, or plastic, this tool can handle a wide range of tasks, making it a versatile addition to any toolbox.

Durability is another key characteristic of the Porter-Cable 90550832. Designed with rugged materials and a robust construction, this tool can withstand the rigors of demanding job sites. Its impact-resistant housing ensures it can endure bumps and drops, giving users confidence in their investment.

In summary, the Porter-Cable 90550832, PC1800AL, is a powerful, versatile, and user-friendly cordless tool that features an 18V lithium-ion battery, a lightweight design, a keyless chuck, and a durable build. Its blend of innovative technologies and essential characteristics makes it an excellent choice for both professionals and DIY enthusiasts looking to tackle a variety of projects with ease and efficiency.