Bryant 558F installation instructions ‘‘A’’, ‘‘C’’

MAXIMUM ALLOWABLE

DIFFERENCE (in.)

A-B	B-C	A-C
0.5	1.0	1.0

Fig. 3 — Unit Leveling Tolerance

NOTE: Trap should be deep enough to offset maximum unit static differ- ence. A 4-in. trap is recommended.

Fig. 5 — Condensate Drain Piping Details

HORIZONTAL	DRAIN PLUG
DRAIN OUTLET

NOTE: Drain plug is shown in factory-installed position.

Fig. 4 — Condensate Drain Connection (Side View)

NOTES:

1. Dimension in ( ) is in millimeters.

2.Hook rigging shackles through holes in base rail, as shown in detail ‘‘A.’’ Holes in base rails are centered around the unit center of grav- ity. Use wooden top skid when rigging to prevent rigging straps from damaging unit.

3.Unit weights do not include economizer. See Tables 1A and 1B for unit weight of economizer.

CAUTION: All panels must be in place when rigging. Unit is not designed for handling by a fork truck. Damage to unit may result.

UNIT	OPERATING				DIMENSIONS
	WEIGHT		‘‘A’’		‘‘B’’		‘‘C’’
558F
	lb	kg	in.	mm	in.	mm	in.	mm
090,091	755	342	77.42	1967	40.25	1022	41.31	1050
102,103	760	345	77.42	1967	40.25	1022	41.31	1050
120,121	915	415	77.42	1967	40.25	1022	49.31	1253
150,151	930	422	77.42	1967	40.25	1022	49.31	1253

Fig. 6 — Rigging Details

—4—