ASSEMBLY
1.Locate and identify all parts.
2.Insert the plug (F) Fig. 1, into the water tray (A) Fig. 1. The plug should be inserted into the top of the water tray as shown in Fig. 2.
ATTACHING THE MOTOR TO THE SAW ARM
1.Place the motor on a flat surface.
2.Line up the 3 holes (A) Fig. 3, in the motor, with the 3 holes (A) Fig. 4 in the saw arm.
3.Thread each screw (G) Fig. 1, through the holes in the saw arm to the holes in the motor.
Make sure that the motor grounding tab (B) Fig. 3, stays in place when attaching the motor to the saw arm, for this provides a means of grounding the motor.
4.Once the screws are threaded into the saw arm and motor, Fig. 5, tighten securely.
Fig. 2
A
B
Fig. 3
A
Fig. 4
Fig. 5
9