Porter-Cable CPFAC2600P Customer Responsibilities, To Check Safety Valve, To Drain Tank

Page 14

MAINTENANCE

Customer Responsibilities

 

Before

Daily or

 

each

after

 

each

 

use

 

use

 

 

Check Safety Valve

●

 

Drain Tank

 

●

Unit cycles automatically when power is on. When performing maintenance, you may be exposed to voltage

sources, compressed air, or moving parts. Personal injuries can occur. Before performing any maintenance or repair, disconnect power source from the compressor and bleed off all air pressure.

NOTE: See "Operation" section for the location of controls.

To Check Safety Valve

If the safety valve does not work properly, over- pressurization may occur, causing air tank rupture or an

explosion.

1.Before starting compressor, pull the ring on the safety valve to make sure that the safety valve operates freely. If the valve is stuck or does not operate smoothly, it must be replaced with the same type of valve.

To Drain Tank

1.Set the On/Auto/Off lever to "OFF".

2.Pull the regulator knob out and turn counterclockwise to set the outlet pressure to zero.

3.Remove the air tool or accessory.

4.Pull ring on safety valve allowing air to bleed from the tank until tank pressure is approximately 20 psi. Release safety valve ring.

5.Drain water from air tank by opening drain valve (counter-clockwise) on bottom of tank.

Water will condense in the air tank. If not drained, water will corrode and weaken the air tank causing a risk of air

tank rupture.

6.After the water has been drained, close the drain valve (clockwise). The air compressor can now be stored.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, the reinstalled.

D27856

14 - ENG

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Pancake Compressor Result in death or serious injury Minor or moderate injury Safety Guidelines DefinitionsImportant Safety Instructions Death or serious injuryTo Spark HazardRisk of Explosion or Fire Risk of Bursting Risk from Flying ObjectsRisk of Electrical Shock Risk to BreathingRisk of Falling Risk of BurnsRisk from Moving Parts Hazard Risk of Unsafe Operation Jury or Death to YOU or OthersGlossary Model no CPFAC2600PGrounding Instructions InstallationLocation of the Air Compressor Improper Grounding can Result in ElectricalExtension Cords Voltage and Circuit ProtectionKnow Your Air Compressor Description of OperationHow to Stop Before First Start-upHow to Start Before Each Start-UpTo Drain Tank To Check Safety ValveCustomer Responsibilities Valve To Replace or Clean Check ValveCheck Hose ClampUnplug unit Using an adjustable wrench removeTo Replace Regulator Outlet pressure gauge and quick connect From the regulatorStorage Limited Warranty This Warranty does not CoverManual de Compresores De tipo plano Instrucciones Moderadas Definiciones DE Normas DE SeguridadImportantes Instrucciones DE Seguridad Lesiones seriasPeligro Riesgo DE Explosión O Incendio Instrucciones Importantes DE SeguridadGuarde Estas Instrucciones Peligro Riesgo DE Explosión Peligro Riesgo DE Objetos Arrojados POR EL AireRiesgo DE Descarga Eléctrica PeligroPeligro Riesgo DE Inhalación Peligro Riesgo DE Caida Peligro Riesgo DE QuemadurasPeligro Riesgo DE Partes Móviles Riesgo DE Operación Insegura Glosario NO. DE Modelo CPFAC2600PInstrucciones Para Conectar a Tierra Cómo Preparar LA UnidadUbicación del compresor de aire Cables de extensión eléctrica Protección del voltaje y del circuitoDescripción de operaciones OperaciónConozca su compresor de aire Antes de poner en marcha Cómo utilizar su unidadCómo detenerla Válvula reguladoraAntes de cada puesta en marcha Cómo poner en marchaCómo verificar la válvula de seguridad MantenimientoResponsabilidades del cliente Cómo drenar el tanqueServicio Y Ajustes Para reemplazar o limpiar la válvula reguladoraNiple Para reemplazar el reguladorRegulador Conector rápido FlechaAlmacenaje Aire, originando un riesgo de ruptura de sus paredesGarantía Limitada Esta Garantía no CubreManuel Compresseurs Ou la mort Mesures DE Sécurité DéfinitionsConsignes DE Sécurité Importantes MoyennesConserver CES Directives Risque D’EXPLOSION OU D’INCENDIERisque D’ÉCLATEMENT Risque DE Projection D’OBJETSRisque DE Choc Électrique Risque PAR InhalationRisque DE Chute Risque DE BrûluresRisque Relié AUX Pièces Mobiles Risque Dune Utilisation Dangereuse Glossaire NO. DE Modèle CFFAC2600PMontage DE Lappareil Directives DE Mise À LA TerreRallonges Protection contre la surtension et protection du circuitDescription du fonctionnement UtilisationFamiliarisez-vous avec votre compresseur dair Avant le démarrage Utilisation de lappareilArrêt de lappareil Avant chaque mise en marche Mise en marcheVérification de la soupape de sûreté EntretienResponsabilités du client Vidange du réservoirDébranchez le compresseur dair Remplacement ou nettoyage de la soupape de retenueEntretien ET Réglages Remplacement du régulateur Rangement D27856 D27856 Garantie Limitée Cette Garantie NE Couvre PAS CE QUI Suit

CPFAC2600P specifications

The Porter-Cable CPFAC2600P is a versatile and powerful air compressor designed for both DIY enthusiasts and professionals alike. Known for its robust performance and innovative features, this model has garnered attention in the competitive landscape of portable air compressors.

At the heart of the CPFAC2600P is its 26-gallon vertical tank, which efficiently stores air to power a variety of tools. This larger capacity allows it to deliver a sustained airflow, making it suitable for tasks that require consistent pressure. Whether you're inflating tires, powering nail guns, or operating paint sprayers, this compressor stands up to the challenge.

One of the standout characteristics of the CPFAC2600P is its impressive 1.6 horsepower motor. This motor delivers a high CFM (cubic feet per minute) rating, ensuring that users have sufficient air supply for fast recovery times and reduced downtime on the job. The direct-drive pump design also contributes to its overall efficiency, reducing wear and prolonging the lifespan of the compressor.

Porter-Cable has integrated several user-friendly features into the CPFAC2600P. One notable feature is the easy-to-read pressure gauge, which allows for precise monitoring of air pressure in the tank. Additionally, the dual-regulator system gives users the flexibility to set different pressures for various applications, enhancing its versatility.

Safety is another significant consideration with the CPFAC2600P. The unit is equipped with thermal overload protection to prevent motor damage due to overheating. Furthermore, the durable construction and stable base ensure that the compressor remains upright and secure during operation, minimizing the risk of accidents.

Compact and portable, the CPFAC2600P features ergonomic handles and a lightweight design, which make it easy to transport from one job site to another. The rubber feet also provide excellent stability and help to dampen vibration during use.

In conclusion, the Porter-Cable CPFAC2600P stands out in the air compressor market due to its powerful motor, large tank capacity, and user-friendly features. Its combination of safety measures, portability, and versatility make it an excellent choice for both casual users and professionals striving for reliable performance. With the CPFAC2600P in your toolkit, you will be well-equipped to tackle a wide range of air-powered tasks efficiently and effectively.
Top Page Image Contents