Powermatic M-1791257 operating instructions Introduction Specifications, 2013

Page 7

Introduction

This manual is provided by Powermatic covering the safe operation and maintenance procedures for a Powermatic Model 2013 or 2415 Band Saw. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.

Specifications

Model Number

2013

........................................................... 2415

Stock Number (2HP, 1PH, 230V)

1791257

............................................................... na

Stock Number (3HP, 1PH, 230V)

na

..................................................... 1791259

Stock Number (3HP, 3PH, 230/460V*)

.................................

1791258

............................................................... na

Stock Number (5HP, 3PH, 230/460V*)

...........................................

na

..................................................... 1791260

Blade Speeds (SFPM)

2,000 and 4,000

......................................... 2,000 and 4,000

Thickness Capacity, Maximum (in.)

12-3/8

.........................................................14-3/8

Width Capacity, Maximum (in.)

20

............................................................... 24

Table Size (in.)

24 x 24

....................................................... 24 x 28

Table Tilt (deg.)

45 right, 10 left

........................................... 45 right, 10 left

Approximate Blade Length (in.)

158-1/2

.......................................................180-1/2

Blade Widths (in.)

1/4 minimum, 1-1/2 maximum

....................1/4 minimum, 1-1/2 maximum

Switch

magnetic

.................................................... magnetic

Dust Collection Minimum CFM Required

600

............................................................. 600

Table Height at 90o (in.)

35-1/4

.........................................................35-3/8

Floor Space Required (in.)

39 x 45-1/2

................................................. 39 x 51-1/2

Shipping Weight (lbs.)

970

........................................................... 1190

*pre-wired 230 volt NOTE: For 460V operation, magnetic switch (part no. 2013-102D for model 2013; and part no. 2415-102D for model 2415) must be purchased separately and installed. A qualified electrician is recommended.

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without incurring obligations.

7

Image 7
Contents 20and 24 Band Saws Warranty Period Warranty and ServiceTable of Contents Page Page Page 2013 Introduction SpecificationsFloor Diagrams Features and TerminologyUnpacking Contents of the Shipping ContainerInstalling Fence and Rails AssemblyPage Dust Collection Grounding InstructionsVolt, Three Phase Operation Volt, Single Phase OperationExtension cords Three-Phase Test Run Converting from 230 Volt to 460 Volt Three Phase OnlyTable Tilt AdjustmentsTable Stop Blade Tension Installing/Changing BladesBlade Tracking Upper Blade Guides and Upper Support Bearing Upper Blade Guide AssemblyLower Blade Guides and Lower Support Bearing Belt Tension Miter GaugeOperating Controls Blade Speed AdjustmentBelt Alignment Operation General ProcedureBrake Pedal Blade Lead RippingCrosscutting ResawingBlade Selection Pitch WidthShape Material SetTire Replacement MaintenanceBand Wheel Replacement For Radius Cutting Blade Selection GuideTroubleshooting Operational Problems Trouble Troubleshooting Mechanical and Electrical Problems Trouble Probable Cause Remedy Replacement PartsIndex No. Part No Description Size Qty Parts List Saw Body Assembly 2013 Band Saw2415-102ORN Parts List Saw Body Assembly 2415 Band SawSaw Body Assembly 2013 Parts List Table Assembly 2013 Band Saw Index No. Part No Description Size Qty Parts List Table Assembly 2415 Band Saw Index No. Part No Description Size Qty Table Assembly 2013 For 2013-3, serial #01062013090 to Parts List Upper Wheel Base Assembly 2013 Band SawFor 2415-3, serial #01062415011 to Parts List Upper Wheel Base Assembly 2415 Band SawUpper Wheel Base Assembly 2013 Parts List Lower Wheel Base Assembly 2013 Band Saw ST 18AWG Parts List Lower Wheel Base Assembly 2415 Band Saw 2013-459 Limit Switch Cord not shown Lower Wheel Base Assembly 2013 Parts List Guide Bracket Assembly 2013 Band Saw Index No. Part No Description Size Qty Parts List Guide Bracket Assembly 2415 Band Saw Index No. Part No Description Size Qty Guide Bracket Assembly 2013 Band Saw only MotorMagnetic Switch Electrical Connections 230 Volt, 3 Phase Models 2013 Electrical Connections 460 Volt, 3 Phase Models 2013 This page intentionally left blank This page intentionally left blank