Multiquip manual SHS81A CUT-OFF SAW Blade Installation Instructions

SHS81A CUT-OFF SAW — BLADE INSTALLATION INSTRUCTIONS

Figure 4. Tool Kit

Blade Installation Procedure

STEP 1

For proper installation, first remove the blade shaft nut X, outer flange Y, and inner “dual-arbor” flange Z.

Figure 5. Inner and Outer Flanges (Removal) STEP 2

A dual sided, “dual-arbor” inner flange Zaccommodates either a 20 mm or 1-inch arbor hole for operator safety and convenience. The outer flange Yfits on top of the cutting blade.

The Multiquip Side Winder Cut-Off Saw comes with a Tool Kit (Figure 4) that assists you with day to day operations.You will need these tools for the assembly of your saw.

Item G is a versatile screwdriver/wrench that accommodates common bolt/screw and nut head sizes of your saw.

Item H is the wrench necessary to accommodate various allen screws.

STEP 3

Chose the proper blade arbor side of the inner flange (to match your cutting blade arbor) and place this selected side to the

blade shaft [.

Figure 7. Selecting the Proper Blade Arbor

STEP 4

Match the arbor side to the dimension of your blade arbor and “sandwich” between the inner and outer flanges. Tighten the blade shaft nut Xsecurely to hold the blade in place.

Figure 6. Inner and Outer Flanges (Placement) Figure 8. Securing the Cutting Blade

PAGE 16 — SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08)