SHS81A CUT-OFF SAW — MAINTENANCE
V-Belt Changing Procedure (continued)
Re-tension the V-belt by turning the belt tensioning cam | . |
The V-belt should remain in tension. | |
Fully tighten the three nuts Nthat lock the V-belt into the proper tensioning position.
Figure 118. Reversing the Cutting Arm
Re-install the guard Kand V-belt covers. Fully tighten the two cap screws J and reinstall the adjustment knob I.
N
Figure 19. Re-Installing Cover Guard
PAGE 22 — SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08)
