Multiquip CD605E16 (5 HP Electric Motor) manual Stow Cutter 1 SAW Rules for Safe Operation, Safety

Page 8

STOW CUTTER 1 SAW — RULES FOR SAFE OPERATION

RULES FOR SAFE OPERATION

CAUTION:

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the STOW CUTTER 1 SAW . Unless otherwise noted, these guidelines refer to saws with gasoline powered engines.

SAFETY

DO NOT operate or service this equipment before reading this entire manual.

This equipment should not be operated by persons under 18 years of age.

NEVERoperatethesaw without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.

NEVER operate the saw under the influence or drugs or alcohol.

NEVER use accessories or attachments, which are not recommended by STOW or Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

ALWAYS check the saw for loosened hardware such as nuts and bolts before starting.

NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing the saw.

HighTemperatures – Allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with hot! components can cause serious burns.

The engine of this saw requires an adequate free flow of cooling air. NEVER operate the saw in any enclosed or narrow

area where free flow of the air is restricted. If the air flow is restricted it will cause serious damage to the saw's engine and may cause injury to people. Remember the saw's engine gives off DEADLY carbon monoxide gas.

ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

ALWAYS use extreme caution when working with flammable liquids. When refueling, STOP the engine and allow it to cool.

NEVER smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot! engine.

NEVER operate the saw in an explosive atmosphere where fumes are present or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

Topping-off to filler port is dangerous, as it tends to spill fuel.

NEVER use fuel as a cleaning agent.

PAGE 8 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)

Image 8
Contents Cutter Model CD613H18 Stow Cutter 1 SAW Proposition 65 Warning Stow Cutter 1 SAW Operation & Parts Manual REV. #6 06/06/08 Stow Cutter 1 SAW -TABLE of Contents Stow Cutter 1 SAW Parts Ordering Procedures Wilmington Ave Carson, CAStow Cutter 1 SAW Safety Message Alert Symbols Do not follow directionsRotating blade can cut and crush. Keep hands and feet clear Stow Cutter 1 SAW Safety Message Alert SymbolsAlways wear approved eye and hearing protection Rules for Safe Operation SafetyStow Cutter 1 SAW Rules for Safe Operation General Safety Diamond Blade SafetyStow Cutter 1 SAW Rules for Safe Operation Electric SawsAlways know the location of the nearest first aid kit Saw Transportation SafetyMachine Operation And Safety Decals Stow Cutter 1 SAW Specifications SAW Dimension cmSideView Front View DescriptionSpecifications Engine Stow Cutter 1 SAW Specifications EngineControls & Components BeltTension Adjuster Adjusts belt tensionStow Cutter 1 SAW Controls & Components Starting, OFF position stops engine operations SmoothlyFlow of fuel Muffler Used to reduce noise and emissionsElectric Powered Saws 50 or 60 HZ Stow Cutter 1 SAW PREPARATION/PRE-INSPECTIONPreparation / PRE-INSPECTION NEVER! use a worn or frayed extension cordStow Cutter 1 SAW PREPARATION/PRE-INSPECTION Reference manufacturer engineFuel Check Guards And CoversBelt alignment must be Stow Cutter 1 SAW PREPARATION/PRE-INSPECTIONBelt Alignment and Tensioning SAW Blade Inspection Stow Cutter 1 SAW BladesBlades Overtighten Stow Cutter 1 SAW Blade PlacementBlade Placement Initial START-UP PositionPlace the Choke Lever in the Closed position Place the fuel valve lever to the on positionStow Cutter 1 SAW Initial START-UP/OPERATION OperationMaintenance Stow Cutter 1 SAW Maintenance Stow Cutter 1 SAW Troubleshooting SAW Blade TroubleshootingStow Cutter 1 SAW Troubleshooting Engine Troubleshooting EngineSymptom Possible Cause Solution With correct type fuelWith correct type of fuel Replace governor springStow Cutter 1 SAW Operation & Parts Manual REV. #6 06/06/08 Explanation of Code in Remarks Column NO. ColumnPart NO. Column QTY. ColumnStow Cutter 1 SAW Suggested Spare Parts Suggested Spare PartsDescription Belt 3VX300 5HP Electric Motor Spark PLUG, BPR6ES, NKGStow Cutter 1 SAW Nameplate and Decals DecalsNameplate and Decals DECAL, StowDECAL, Warning DECAL, Warning FeetStow Cutter 1 SAW ENGINE, Belts and Pulleys Assy ENGINE, Belts and Pulleys AssyStow Cutter 1 SAW ENGINE, Belts and Pulleys Assy Stow Cutter 1 SAW Electric Motor Assy Electric Motor AssyBelt Guard Pulley MotorMOTOR, 5 HP Electric Pulley SpindleStow Cutter 1 SAW Undercarriage Assy Undercarriage AssyWheel Base Assembly Clamp & Bearing AssemblyClamp Assembly KnobStow Cutter 1 SAW Water System and Blade Assy Stow Cutter 1 SAW Water System and Blade Assy Stow Cutter 1 SAW Pointer Assy Pointer AssyARM, Pointer SCREW, Pointer ARMWHEEL, Pointer Honda GX390K1QWT2/GX390U1QWT2 ENG. AIR Cleaner Assy AIR Cleaner AssyHonda GX390K1QWT2/GX390U1QWT2 ENG. AIR Cleaner Assy Honda GX390K1QWT2/GX390U1QWT2 ENG. Camshaft Assy Camshaft AssySPRING, Weight Return ROD, PushARM, Valve Rocker LIFTER, ValveHonda GX390K1QWT2/GX390U1QWT2 ENG. Carburetor Assy Carburetor AssyPLATE, Lever Setting CARBURETOR, Gasket SETValve SET, Float Float SETControl Assy Honda GX390K1QWT2/GX390U1QWT2 ENG. Control Assy Honda GX390K1QWT2/GX390U1QWT2 ENG. Crankcase Assy Crankcase Cover AssyWEIGHT, Governor HOLDER, Governor WeightPIN, Governor Weight GASKET, Case CoverHonda GX390K1QWT2/GX390U1QWT2 ENG. Crankshaft Assy Crankshaft AssyIncludes Item W Includes Item W/+Honda GX390K1QWT2/GX390U1QWT2 ENG. Cylinder Barrel Assy Cylinder Barrel AssySwitch ASSY., OIL Level SHAFT, Governor ARMBOLT, Drain Plug OIL SealHonda GX390K1QWT2/GX390U1QWT2 ENG. Cylinder Head Assy Cylinder Head AssyGUIDE, Valve OS Optional CLIP, Valve GuideGASKET, Cylinder Head COVER, HeadHonda GX390K1QWT2/GX390U1QWT2 ENG. FAN Cover Assy FAN Cover AssyCLIP, Tube ShroudFlywheel Assy NUT, Special 16MM FAN, CoolingFlywheel Fuel Tank Assy Honda GX390K1QWT2/GX390U1QWT2 ENG. Fueltank Assy Honda GX390K1QWT2/GX390U1QWT2 ENG. Ignition Coil Assy Ignition Coil AssyGROMMET, Wire WIRE, Stop Switch 430MMCLIP, Wire Harness Coil ASSY., IgnitionMuffler Assy Honda GX390K1QWT2/GX390U1QWT2 ENG. Muffler Assy Honda GX390K1QWT2/GX390U1QWT2 ENG. Piston Assy Piston AssyBOLT, Connecting ROD Ring SET, Piston STDRing SET, Piston Piston STDHonda GX390K1QWT2/GX390U1QWT2 ENG. Recoil Stater Assy Recoil Starter AssyPULLEY, Recoil Starter RATCHET, StarterSPRING, Friction SPRING, Starter ReturnHonda GX390K1QWT2/GX390U1QWT2 ENG. Labels Assy Labels AssyHonda GX390K1QWT2/GX390U1QWT2 ENG. Labels Assy Terms and Conditions of Sale Stow Construction Equipment Terms and Conditions of Sale PartsStow Cutter 1 SAW Operation & Parts Manual REV. #6 06/06/08 HERE’S HOW to GET Help Your Local Dealer is