Marmitek CM15PRO manual Safety Warnings, HOW does Marmitek X-10 WORK?, CM15Pro + ActiveHome Pro

CM15PRO™

Programmable Computer Interface+ ActiveHomePro™ Software

SAFETY WARNINGS

•To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose the components to rain or moisture. Do not use the product close to a bath, swimming pool etc.

•Do not expose the components of your systems to extremely high temperatures or bright light sources.

•In case of improper usage or if you have altered and repaired the product yourself, all guar- antees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product respon- sibility.

•This product is not a toy. Keep out of reach of children.

•Do not open the product (battery panel excepted): the device may contain live parts. The product should only be repaired or serviced by a qualified repairman.

•Keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never use old and new batteries or different types of batteries together. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the bat- teries when inserting them in the product. Wrong positioning can cause an explosion.

•Only connect the adapter to the mains after checking whether the mains voltage is the same as the values on the identification tags. Never connect an adapter or power cord when it is damaged. In that case, contact your supplier.

•Automatic switching devices provide comfort, but can also be dangerous. They can surprise people or can ignite clothing hanging over an electric heat source. Please be careful and take appropriate measures to avoid accidents.

HOW DOES MARMITEK X-10 WORK?

Marmitek X-10 components use the existing mains wiring to communicate (using Marmitek X-10 signals). You can build a complete system using the three different kind of components of the Marmitek X-10 System:

1.Modules These components will receive Marmitek X-10 signals and will switch or dim the attached lamp or appliance. Examples of these modules are lamp modules and appliance modules. These are available as build-in, micro, DIN rail and plug-in modules.

2.Controllers These components will transmit Marmitek X-10 signals and thus will control the Modules.

3.Transmitters Wireless components like remotes. The signals of these components will be received by a controller with transceiver functionality (IRRF 7243,

ENGLISH

CM15Pro™ + ActiveHome Pro™ 3