CONTENTS
1x CM15Pro Programmable Computer Interface
1x USB Cable
1x ActiveHomePro installation CD
1x Installation guide
1x 9 Volt 6LR61 alkaline block battery
1x Metal bracket
1x Antenna sleeve
SYSTEM REQUIREMENTS
Windows based Personal Computer
Available USB port
CD ROM or DVD player
Windows XP or Windows Vista operating system
HARDWARE SETUP AND SOFTWARE INSTALLATION
Please read through these installation steps completely before you start to install your AHP software.
Please install the Marmitek AHP software before you plug in the CM15Pro!
1.Unpack the interface, USB cable, antenna sleeve, battery and CD with the setup software.
2.Slide the antenna sleeve over the CM15Pro’s wire antenna.
3.Plug the AC connector into an AC outlet near your PC. The unit should be mounted at a height of 1 meter for best performance and located away from any sources of RF interference such as computers, monitors, etc.
4.Open the battery compartment and insert the 9V alkaline block battery in the bat- tery compartment (for retaining the time of day if there’s a power outage). Respect the polarity. Replace the cover.
6 | © MARMITEK |
