8.1INFLATING
1.Connect the inflator/deflator to either the battery pack or the DC Power Adapter.
2.Be sure the appropriate nozzle head is attached to the tapered inflating port of the inflator/deflator unit. Push the nozzle onto the inflation port to attach. The inflating port can be identified by location. It is on the side of the unit.
3.Position the nozzle against the valve of the inflatable item. Turn on the Inflator/Deflator on using the On/Off switch, and inflate the item to desired firmness. After inflation, move the nozzle away from the valve and turn the switch OFF.
8.2DEFLATING
1.Pull off the nozzle from the inflating port of the unit and reinstall it at the deflating port of the Inflator/Deflator (on the top of the unit). Press the nozzle to attach.
2.Power the Inflator with either the battery pack or the DC Adapter.
3.Position the nozzle against the valve of the inflated item. Turn On the sport inflator/deflator using the On/Off switch and deflate the item.
NOTE: If the inflatable item’s air valve is equipped with a safety flap, it maybe necessary to hold the flap open with a pencil or similarly shaped object to deflate the item.
9.MAINTENANCE/REPLACEMENT PARTS
For replacement parts (batteries, DC Power Adapters, AC charging adapters, cables, etc.), contact Vector Technical Support: (954)
10.BATTERY REPLACEMENT
The battery in the battery pack should be replaced with a new one when the operating capacity is reduced to about one half or the ability to inflate one and one half average sized automobile tires. Make sure that the battery is fully charged before determining that the battery pack should be replaced. Contact Vector Technical Support and ask for part VEC194. This battery pack is also used with other Vector products that include portable inflators and spotlights. For more details, please contact our Sales or Technical Support Department at
11 |