Vector VEC255 owner manual Contents

Page 3

internal battery. For immediate use, attach the DC adapter and operate the appliances from an external 12 volt DC source.

4.To avoid over-inflation, carefully follow instructions on articles to be inflated.

5.Never leave appliances unattended while in use. Allow appliance to cool for five minutes after 10 minutes of continuous operation.

6.Do not use accessories that are not designed to be used with these appliances.

7.Do not place battery pack on heater and keep it out of sunlight.

8.Do not charge battery when it is at or above 122° F (50° C). Allow the battery pack to cool before charging.

CONTENTS

1.

INTRODUCTION

4

2.

ADDITIONAL KEY FEATURES

5

3.

ATTACHING THE COMPRESSOR’S AIR HOSE

6

4.

POWERING THE COMPRESSOR OR INFLATOR

6

 

4.1

Powering from the battery pack

 

4.2

DC Power Adapter Use

6

5.

CHARGING/RECHARGING THE BATTERY PACK

...... 7

 

5.1

AC Recharge of battery pack

7

6.

COMPRESSOR/TIRE INFLATOR

8

 

6.1

Tire inflation or products with a valve stem

8

 

6.2

Inflate other articles (without valve stem)

9

7.

TYPICAL INFLATION TIMES

9

8.

LOW PRESSURE INFLATOR

10

 

8.1

Inflator

11

 

8.2

Deflator

11

9.

MAINTENANCE/REPLACEMENT PARTS

11

10.

BATTERY REPLACEMENT

11

11. BATTERY DISPOSAL

12

12. SPECIFICATIONS

12

 

WARRANTIES

13,14

3

Image 3
Contents Warranty Information Important Safety Information Contents Introduction Additional KEY Features DC Power Adapter USE Powering from the Battery PackAC Recharge of Battery Pack CHARGING/RECHARGING the Battery PackTire Inflation or Products with a Valve Stem COMPRESSOR/TIRE InflatorInflate Other Articles Without Valve Stem Typical Inflation Times for Compressor USE LOW Pressure INFLATOR/DEFLATORDeflating MAINTENANCE/REPLACEMENT PartsBattery Replacement InflatingFor Inflator Battery DisposalSpecifications For CompressorDAY Limited Warranty Registration Form Year Extended Warranty Registration Form