Vector VEC255 owner manual Additional KEY Features

Page 5

The Compressor On/Off Switch controls operation of the compressor. It conveniently is depressed and released to control inflation. An exact pres- sure is obtained by observing the gauge and releasing the trigger when the correct pressure is achieved. For longer inflation operations, the Trigger Lock can be moved laterally to lock the trigger in the ON position. Pushing the trigger lock to the opposite direction releases the trigger (OFF) and inflation stops.

2.ADDITIONAL KEY FEATURES

Trigger Switch with lock to allow hands free operation

Corded -includes a DC power adapter for use with standard 12 volt power supply

Battery Pack includes non-spillable, maintenance-free, heavy duty, sealed, high-density lead-acid battery

Requires no maintenance (other than recharging and cleaning) for optimum operation

Supplied 110 volt AC charger is Underwriter Laboratories (UL) safety tested and listed

Battery Charging LED on battery automatically activated during AC recharge

Analog Pressure Gauge to 260 PSI Compressor

Nozzle Hatch for storing nozzles in compressor

3 nozzles for inflator

FIGURE 2

NOZZLE HATCH

COVER

 

NOZZLES

PRESSURE

GAUGE

CAUTION: This battery pack is delivered in a partially charged state - you must fully charge it before using it for the first time. Initial AC Charge should be for 10 hours. Refer to Section 6 for use of AC Adapter and detailed charging instructions.

5

Image 5
Contents Warranty Information Important Safety Information Contents Introduction Additional KEY Features DC Power Adapter USE Powering from the Battery PackAC Recharge of Battery Pack CHARGING/RECHARGING the Battery PackTire Inflation or Products with a Valve Stem COMPRESSOR/TIRE InflatorInflate Other Articles Without Valve Stem Typical Inflation Times for Compressor USE LOW Pressure INFLATOR/DEFLATORBattery Replacement MAINTENANCE/REPLACEMENT PartsInflating DeflatingSpecifications Battery DisposalFor Compressor For InflatorDAY Limited Warranty Registration Form Year Extended Warranty Registration Form