Battery Disposal, Specifications, For Compressor

ALWAYS RECYCLE

11.BATTERY DISPOSAL

Contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be disposed of properly. Most states require recycling-contact your local municipal authority for information.

Non-spillable sealed lead-acid battery, must be recycled or disposed of properly. Recycling is required -contact your local authority for information. DISPOSAL QUESTIONS FOR USA CALL toll-free 877-288-7722.

PRBA

WARNINGS:

•Do not dispose of the battery pack in fire as this may result in an explosion

•Before disposing of the battery pack, protect exposed terminals with heavy- duty electrical tape to prevent shorting (shorting can result in injury or fire). Failure to comply with local, state and federal regulations can result in fines, or imprisonment

12.SPECIFICATIONS

FOR COMPRESSOR:


Battery	12 Volt 3 Amp Hour, Non-spillable Sealed Lead-Acid
Compressor		260 PSI Maximum
Weight		1.82 lbs (4 kg)
Height w/battery		11.25 inches (28.57 cm)
Width		4.0 inches (10.16 cm)
Length		7 inches (17.78 cm)
FOR INFLATOR:
Nozzles		3
Voltage		DC - 12V nominal
Current		Approx. 5 Amps
Air Pressure		816 - mm H20
Delivery Volume		175 CFM per min.
Typical Inflating time		10 minutes

11.BATTERY DISPOSAL

12.SPECIFICATIONS

FOR COMPRESSOR:

FOR INFLATOR: