10.1Ripping/Through Sawing
10.0Cutting
Have riving knife and blade guard in place - danger of injury.
Set blade guard to thickness of work- piece.
Set rip fence to desired width of cut and lock in position.
Important!
-Have blade at complete standstill before making adjustments - Disconnect machine from power before setting riving knife
-If width of cut is less than
10.2 Through Cross/Mitre Cuts
A - Have riving knife and blade guard in place - danger of injury.
B - Swing mitre fence onto table and set to required angle
C - Pull mitre fence back and place work against it.
- Start machine
D - Push mitre and work forward to feed into blade
E - When cut is completed pull back both mitre fence and work