Model 533A Energy-Efficient Air Conditioners incorporate innovative technology to provide quiet, reliable cooling per- formance. Built into these units are the features most desired by homeowners today including SEER ratings of at least
12.0when combined with specific Bryant equipment. The 533A air conditioning system has been designed utilizing Bryant’s Puron® refrigerant. The environmentally sound refrigerant allows you to make a responsible decision in the protection of the earth’s ozone layer. All models are listed with UL, c-UL, ARI, CEC, and CSA-EEV. The 533A meets the Energy Star® guidelines for energy efficiency.
AVAILABLE OPTIONS
Puron® Environmentally Friendly Refrigerant—Is Bryant’s refrigerant designed to help protect the environment. Puron® is an HFC refrigerant that does not contain chlorine, which is damaging to the ozone layer. The most important advantage of Puron® refrigerant is that it has not been banned in future air conditioning systems as the traditional refrigerant, R-22, has been. Puron® refrigerant is in service in thousands of systems providing highly reliable, environmentally sound performance. For specific R-22 phase out information see your Bryant distributor.
UNIT DESIGN—Copper tube, enhanced sine wave alumi- num fin coil is designed for optimum heat transfer. Vertical air discharge carries sound and hot condenser air up and away from adjacent patio areas and foliage. Heat pump style base pan for easy removal of water, dirt, and leaves.
ELECTRICAL RANGE—All units are offered in single phase 208/230v. The 030 through 060 sizes are offered in 208/230v 3 phase.
WIDE RANGE OF SIZES—Available in 6 nominal sizes from 024 through 060 to meet the needs of residential and light commercial applications.
COMPRESSOR—This unit features a scroll compressor, which is significantly more efficient than conventional com- pressors. Its simple design offers improved reliability and each compressor is mounted on rubber isolators for addi- tional sound reduction. Scroll compressors start under most system loads, minimizing the need for start assistance com- ponents. For improved serviceability, all models are equipped with a compressor terminal plug. Continuous oper- ation is approved down to 55°F (12.8°C) in the cooling mode. (See cooling performance tables.) Operation down to 0°F or –20°F is approved when low-ambient requirements are met.
WEATHER-PROTECTIVECABINET—The access panels and top are protected with a galvanized coating, then treated with a layer of zinc phosphate to which a modified polyester powder coating is applied and baked on. This provides each unit with a hard, smooth finish that will last for many years.
All screws on cabinet exterior are coated for a long-lasting, rust-resistant, quality appearance.
TOTALLY ENCLOSED FAN MOTOR—Means greater reli- ability under adverse weather conditions and dependable performance for many years. The permanent-split-capacitor type motor was designed for optimum efficiency. The motor was tested and qualified under extreme conditions to ensure the greatest reliability.
APPLICATION VERSATILITY—The 533A can be combined with a wide variety of evaporator coils and blower packages to provide quiet, dependable comfort. Unit can be installed on a roof or at ground level on a slab.
EXTERNAL SERVICE VALVES—Both service valves are brass, front seating type with sweat connections. Valves are externally located so refrigerant tube connections can be made quickly and easily. Each valve has a service port for ease of checking operating refrigerant pressures.
EASY SERVICEABILITY—One access panel provides access to electrical controls and compressor. Removal of wire dome gives access to fan motor and removal of the top gives access to the coil.
COMPRESSOR PROTECTION—All compressors are pro- tected by internal temperature and current sensitive over- loads. An internal pressure relief is provided for high- pressure protection to the refrigerant system.
Long term reliability is assured through the use of both high and low pressure switches. Also included is a liquid line filter drier designed to trap moisture and contaminants, which could otherwise shorten the life of the system.
LIMITED WARRANTY—Standard 1-year warranty on all parts. Additional 4-year warranty on compressor.
