Parkside PFBS 9.6V manual Cordless multi-grinder Pfbs Introduction, Proper use

Page 5

Introduction

The following pictograms are used in these operating instructions / on the device:

Read instruction manual!

Caution – electric shock!

Danger to life!

 

 

 

V~

Volt (AC)

For indoor use only!

 

W

Watts (Effective power)

Risk of loss of life by electric shock from

damaged mains lead or mains plug!

 

 

Direct current

Wear dust protection mask, protective

 

(Type of current and voltage)

glasses and protective gloves.

n0

Design no-load speed

Avoid contact with rapidly rotating tools!

mA

Milliamps / Amps / Amp-hours

Risk of fire!

A / Ah

 

 

 

Safety class II

Proper procedure and handling.

 

Observe caution and safety notes!

Do not dispose of rechargeable batteries

 

with your household refuse!

 

 

 

Risk of explosion!!

Dispose packaging and appliance in

 

an environmentally-friendly way!

 

 

Keep children away from electrical power tools!

Cordless multi-grinder PFBS 9.6

Introduction

Please make sure you familiarise yourself fully with the way the device works before

you use it for the first time and that you understand how to handle electrical power tools correctly. To help you do this please read the ac- companying operating instructions. Keep these in- structions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation.

Proper use

The cordless multi-grinder is intended to be used for drilling, milling, engraving, polishing, cleaning, grinding, cutting and sawing wood, metal, plastic, ceramics or stone in dry environments. Any other use or modification to the drill / grinder shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use. Not intended for commercial use.

Features and equipment

Cordless multi-grinder:

1ON / OFF switch / Rotational speed control

2 Battery pack release button

6GB/IE/CY

Image 5
Contents Pfbs 9.6 Page Page Table of contents Introduction Features and equipmentCordless multi-grinder Pfbs Introduction Proper useTechnical information Included itemsWorkplace safety General safety advice for electrical power toolsElectrical safety Personal safetyUse and handling of the cord- less electrical power tool Careful handling and use of electrical power toolsSafety advice for all uses Safety advice relating to kickback Further special safety advice for disc-cutting Special safety advice relating to grinding and disc-cuttingSpecial safety advice for abrading using sandpaper Special safety advice for polishingCharging the battery pack Special safety advice for working with wire brushesAdvice on working with materials / Tools / Speed ranges Switching on and off / Setting the speed rangeOperation Inserting or replacing a tool / colletTips and tricks Operation / Maintenance and cleaningMaintenance Cleaning Maintenance and cleaning / Service / Warranty / DisposalService Warranty DisposalManufacturer’s Declaration Conformity / Manufacturer Manufacturer’s Declaration of Conformity / ManufacturerPage Einleitung InhaltsverzeichnisAllgemeine Sicherheitshinweise für Elektrowerkzeuge BedienungBestimmungsgemäßer Gebrauch EinleitungAkku-Multischleifmaschine Pfbs Einleitung Technische Daten AusstattungLieferumfang Elektrische Sicherheit Arbeitsplatz-SicherheitVermeiden Sie Lebensgefahr durch elektrischen Schlag Zweckentfremden Sie das Kabel nicht, um das ElektroVerwendung und Behandlung des Elektrowerkzeugs Sicherheit von PersonenSicherheitshinweise für alle Anwendungen Allgemeine Sicherheitshinweise für ElektrowerkzeugeVerwendung und Behandlung des Akkuwerkzeugs Rückschlag und entsprechende Sicherheitshinweise Weitere besondere Sicherheits- hinweise zum Trennschleifen Besondere Sicherheitshinweise zum Arbeiten mit Drahtbürsten Besondere Sicherheitshinweise zum SandpapierschleifenBesondere Sicherheitshinweise zum Polieren Akku-Pack ins Gerät einsetzen / entnehmen Akku-Pack ladenAn eine Steckdose anWerkzeug / Spannzange einsetzen / wechseln BedienungEin- und ausschalten / Drehzahlbereich einstellen Ziffer am WerkstoffService Bedienung / Wartung und Reinigung / ServiceTipps und Tricks WartungGarantie Garantie / EntsorgungEntsorgung Werfen Sie Elektrowerkzeuge nicht in den HausmüllKonformitätserklärung Hersteller Konformitätserklärung / HerstellerKompernass Gmbh