Introduction
3Battery pack
4Metal stirrup hanger
5 Clamping nut
6 Spigot nut
7 Spindle lock
Battery charger (see Fig. A):
8Charging cradle
9 Mains adapter
10LED
Accessories (see Fig. B):
116 HSS drills
122 Mandrels for mounting tools
133 Polishing wheels
144 Grinding wheels
151 Metal brush
161 Saw blade
1710 Cutting wheels
185 Collets
192 Plastic brushes
202 Engraving bits
213 Milling bits
225 Grinding bits
23Combination tool
Included items
1 Cordless
1 Charging cradle
1 Mains adapter
1 Plastic case
1 Accessory kit
1 Operating instructions
Technical information
Model PFBS 9.6 - KH 3125:
Rated voltage: | 9.6 V DC |
|
|
| |||
n0 5000 - 25000 | |||
Max. disc ø: | 25 mm | ||
Rechargeable battery pack PFBS
Rated voltage: | 9.6 V DC |
|
|
| |
|
| ||||
Capacity: | 1000 mAh | ||||
Battery charger PFBS | |||||
Primary: |
|
|
|
|
|
Rated voltage: | 230 V ~ 50 Hz | ||||
Rated output: | 8.5 W | ||||
Secondary: |
|
|
|
|
|
Rated voltage: | 12 V DC |
|
| ||
| |||||
Charging current: | 400 mA | ||||
Charging duration: | approx. 3 hours | ||||
Protection class: | II / | ||||
Noise and vibration data:
Measured values for noise are determined in accord- ance with EN 60745. The
Sound pressure level: | 61 dB(A) |
Sound power level: | 75 dB(A) |
Uncertainty K: | 3 dB |
Evaluated acceleration, typical: Hand / arm vibration: 2,63 m / s2 Uncertainty K = 1,5 m / s2
WARNING! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. It is easy to underestimate the vibration load if the electrical pow- er tool is used regularly in particular circumstances.
Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working.
GB/IE/CY 7