SECTION 3: CIRCUIT REQUIREMENTS
110 Volt
Amperage Draw
The Model G0536 motor is wired to operate at
110V and draw the following load:
Motor Load | 1.4 Amps |
Plug Type
The Model G0536 is supplied with a NEMA
Figure 1. NEMA 5-15 plug and grounded outlet.
Circuit Breaker Requirements
Use the following guidelines when choosing a cir- cuit breaker for your machine:
Recommended Circuit Breaker | 5 Amp |
Your Circuit Capacity
Always check to see if the wires in your circuit are capable of handling the amperage load from your machine. If you are unsure, consult a qualified electrician.
If you operate this machine on any circuit that is already close to its capacity, it might blow a fuse or trip a circuit breaker. However, if an unusual load does not exist and a power failure still occurs, contact a qualified electrician or our Service Department at (570)
Serious personal injury could occur if you connect your machine to the power source before you have completed the assembly process. DO NOT connect the machine to the power source until instructed to do so.
G0536 Scroll Saw |