Grizzly instruction manual Model G8622 Hardware and Qty

The Model G8622 Hardware and Qty:
3⁄4" Spindle	1
1" Spindle	1
11⁄4" Spindle	1
3⁄4" Spindle Nut	2
1" Spindle Nut	2
11⁄4" Spindle Nut	2
Spacer Set	18
Hold-Downs	2
Hold-Down Bars	2
Hold-Down Brackets	2
Fence Pieces	2
Fence Mounts	2
Dust Port	1
Safety Guard	1
Multi Wrench 10, 19, 23, 26, 37mm	1
3mm Allen® Wrench	1
4mm Allen® Wrench	1
11⁄2" Box Wrench	1
1" Box Wrench	1
Stainless Wheel Handles	2
Round Knobs	4
Plastic Adjustment Wheels	2
47⁄8" Threaded Stud Knobs	2
4" Double Threaded-End Bars	2
Draw Bar w/Nut	1
Shaft Guide Bar w/Setscrew	2
Fence-Bracket Adjustment Handles	2
Adjustment Guide Bar	2
5⁄16" Lock Washers	6
5⁄16"-18 x 15⁄16" Flat Head Screws	7
5⁄16" Flat Washers	8
1⁄2" Flat Washers	4
5⁄16" Hex Nuts	6

Figure 4. Shaper hardware.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedien- cy, replacements can be obtained at your local hardware store.

G8622 Tilting Spindle Sliding Table Shaper -9-