Start Up
Loose hair and clothing could get caught in machinery causing seri- ous personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.
Projectiles thrown from the machine could cause serious eye injury. Wear safety glasses at all times.
Before starting the machine:
1.Read this manual and make sure you follow all safety precautions before operating this machine.
2.Make sure the blade guard has been cor- rectly installed and is adjusted properly as shown on Page 12.
3.Make sure all tools or foreign objects have been removed from the machine.
4.Review Section 3: Circuit Requirements beginning on Page 6 and make sure all wiring is correct.
Starting the machine:
1.Wear
2.Plug the saw into the power source. Be sure the cord is positioned with a “drip loop” below the level of the outlet as shown in Figure 18. This prevents water from running down the cord and into the outlet. Instead the water will drip to the floor at the “drip loop” on the cord.
“Drip Loop” Below The
Level Of The Outlet
Figure 18. Correct cord positioning.
3.Turn the machine on and make sure your hand is on the power switch in case you need to quickly turn the machine off. The machine should run smoothly with little or no vibration.
H3390 Wet Tile Saw |