Grizzly H3390 instruction manual Maintenance, General

Page 20

SECTION 6: MAINTENANCE

!Disconnect power to the machine when perform-

ing any maintenance on the table saw. Failure to do this could result in serious personal injury.

Loose hair and clothing could get caught in machinery causing seri- ous personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.

Projectiles thrown from the machine could cause serious eye injury. Wear safety glasses during assembly.

General

Regular periodic maintenance on your Model H3390 will ensure its optimum performance. Make a habit of inspecting your machine each time you use it.

Check for the following conditions and repair or replace when necessary:

1.Conditions allowing prolonged exposure of the motor and electrical components to water.

2.Loose mounting bolts.

3.Worn switch.

4.Worn or damaged cords and plugs.

5.Damaged V-belt.

6.Any other condition that could hamper the safe operation of this machine.

7.Inspect blades for damage.

8.Guard alignment and operation.

 

 

 

 

 

 

 

 

-18-

 

 

H3390 Wet Tile Saw

 

 

Image 20
Contents WET Tile SAW Page Table of Contents Safety Safety Instructions For Power ToolsLength AMP Rating 25ft 50ft 100ftSafety Instructions For Tile Saws Introduction CommentaryCircuit Requirements 110V OperationGrounding Extension Cord Site Considerations SET UPClean Up Main Features Right side of sawAssembly To assemble the sawWater Reservoir Saw Frame Blade Guard Lock Knob Attaching the rail/table assembly to Saw frame Blade ChangesStart Up Starting the machineTo set up the water lube system LubricationOperation Cut PreparationCutting To make a cutTable fine-tuning cap screw Rip Fence 45˚ FenceMaintenance GeneralReference Info Machine Data Sheet Model H3390 10 Wet Tile SawH3390 Wet Tile Saw H3390 Wet Tile Saw Description H3390 Wet Tile Saw H3390 Wet Tile Saw Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WAPage Call Today For a Free Full Color Catalog