Grizzly H6246 instruction manual Fences, To assemble fence

Fences
Components and Hardware Needed:	Qty
Long Fence	1
Short Rail	1
Short Fence	1
Long Rail	1
Knob Bolts M8-1.25 x 20	2
Set Screws M8-1.25 x 12	2
Hex Bolts M6-1 x 16	4
Rail Brackets	2
Tools Needed:	Qty
Wrench or Socket 10mm	1
To assemble fence:

1.Mount the two rail brackets to the edge of the table with the hex bolts, as shown in Figure 16.

Figure 16. Rail brackets installed on table.

2.Insert the end of the long rail into the short fence and secure together with one of the set screws (Figure 17).

3.Insert the end of the short rail into the long fence and secure together with the remaining set screw.

Figure 17. Securing fence to rail.

4.Slide the long rail/short fence assembly into the bracket that is mounted on the front of the table.

5.Slide the short rail/long fence assembly into the bracket that is mounted on the left-side of the table.

6.Use the knob bolts to tighten both fence rails to the fence brackets. Your completed assembly should look like Figure 18.

Figure 18. Completed assembly of fences and

rails.

-18- H6246 Meat Cutting Bandsaw