Unpacking Piece Inventory | Grizzly G3619 instruction

Unpacking		Piece Inventory

The 24" and 27" Resaw Bandsaws are shipped from the manufacturer in a carefully packed crate. If you discover the machine is damaged after you have signed for delivery, please call Customer Service immediately for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise filing a freight claim can be difficult.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

The 24" and 27" Resaw Bandsaws are heavy machines. DO NOT

over-exert yourself while unpacking or moving your machine – you will need assis- tance and power equip- ment. Serious personal injury may occur if safe moving methods are not followed.

Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.

After all the parts have been removed from the carton, you should have:

•Bandsaw Unit with Blade

•Table with Rail Attached

•Dust Port

•Fence

•Miter Gauge (G3619/G3620 only)

•Hardware Bag

(1) Allen Wrench 6mm

(1)Open-End Wrench 12/14 mm

(1)Open-End Wrench 21/23 mm

(1)Phillips Screwdriver

In the event that any non-proprietary parts are missing (e.g. nuts or washers), we would be glad to replace them, or for the sake of expediency, replacements can be obtained at your local hard- ware store.




24" & 27" Resaw Bandsaws			-9-