Grizzly G1067Z instruction manual Adjustments, Headstock

SECTION 3: ADJUSTMENTS

Headstock

The Model G1067Z headstock can be swiveled 180˚ as well as positioned anywhere along the bed.

1.Loosen the quick release lever by pushing it down (Figure 13).

2.Move the headstock to the desired position and re-engage the quick release lever (Figure 14). Note—The large hex nut under the headstock will require occasional adjust- ing to assure proper clamping pressure to the bed. Turn the hex nut in small increments to fine tune the clamping pressure.

Quick release lever

Figure 13.

Figure 14.

1.Loosen the quick release lever by pushing it down.

2.Pull the spring loaded quick release set pin (Figure 15) and rotate the headstock clock- wise 90˚ or 180˚.

Set pin

Figure 15.

-14- G1067Z Wood Lathe