Site Considerations | Clean Up | |
|
|
|
|
|
|
Floor Load
The Model G1067Z weighs 179 lbs. Most com- mercial floors are suitable for your machine. Some floors may require additional reinforcement to support the machine, the operator, and the workpiece.
Working Clearances
Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your machine.
Unsupervised children and visitors inside your shop could receive seri- ous personal injury. Ensure child and visitor safety by keeping all entrances to the shop locked at all times. DO NOT allow unsupervised children or visitors in the shop at any time.
G1067Z Wood Lathe
The unpainted surfaces are coated with a waxy oil to protect them from corrosion during ship- ment. Remove this protective coating with a sol- vent cleaner or
Gasoline and petroleum products have low flash points and could explode if used to clean machin- ery. DO NOT use gaso- line or petroleum prod- ucts to clean the machin- ery.
Smoking near solvents could ignite an explosion or fire and cause serious injury. DO NOT smoke while using solvents.
Lack of ventilation while using solvents could cause serious personal health risks, fire, or environmental hazards. Always work in a well ventilated area to pre- vent the accumulation of dangerous fumes. Supply the work area with a constant source of fresh air.