Unpacking |
| Piece Inventory |
|
|
|
|
|
|
The Model G1067Z Wood Lathe is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, please call Customer Service immediately for advice.
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
The G1067Z represents a load of 179 pounds. Seek assistance before beginning assembly.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
After all the parts have been removed from the carton, you should have:
• Main Lathe Unit
• Grizzly Paddle Switch
• Front/Rear Covers
• Index Pin
• 6'' Face Plate
• 12'' Tool Rest
• Tool Rest Support
• Tool Rest Extension
• Knock Out Bar
• Stand Legs (4)
• Stand Support, Long (2)
• Stand Support, Short (2)
• Upper Mount Plate (2)
• End Stand Support (2)
Fasteners: |
|
• Carriage Bolt 5⁄16"- 18 x 3⁄4" | 24 |
• Flat Washer 5⁄16" | 24 |
• Cap Screw 5⁄16"- 18 x 1" | 8 |
• Hex Nut 5⁄16"- 18 | 32 |
• Phillips Head Screw 10 - 24 x 3⁄8" | 12 |
• Lock Washer 5⁄16" | 8 |
In the event that any non proprietary parts are missing (e.g. a nut or a washer...), we would be glad to replace them, or, for the sake of expedi- ency, replacements can be obtained at your local hardware store.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| G1067Z Wood Lathe | |
|
|
|
|
|