Grizzly G9979 owner manual Operations, Operation Safety Basic Controls, Model G8144Z/G8145Z

SECTION 4: OPERATIONS

Operation Safety Basic Controls

Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.

Loose hair and cloth-

ing could get caught in

machinery and cause seri-

ous personal injury. Keep

loose clothing and long

hair away from moving machinery.

NOTICE

If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.

G8144Z/G8145Z/G8146Z (Manufactured Since 6/11)

Use the descriptions and figures below to become familiar with the basic controls of your bandsaw.

Model G8144Z/G8145Z

Digital Speed Display: Shows the blade speed in feet per minute (FPM).

Variable Speed Control: Adjusts the blade speed between 104–1300 FPM (Model G8144Z) or 108–1800 FPM (Model G8145Z).

Digital Display

Variable Speed

Control

Blade

Welding

Station

Start/Stop

Switch

Figure 12. Model G8144Z/G8145Z electrical

controls.

Blade Welding Station: Welds two blade ends to make a continuous loop when repairing a broken blade, fabricating a new blade, or making internal contour cuts.

Bandsaw Start/Stop Switch: Turns power ON/ OFF to the bandsaw motor.

-21-