SPECIFICATIONS
Fastener Type/Gauge | Headless Pins, 23 Gauge | ||
|
| ||
Magazine Capacity | 100 Pins | ||
|
| ||
Operating Pressure | |||
|
| ||
Air Consumption | 5.5 CFM @ 90 PSI | ||
|
| ||
Air Inlet | 1/4” - 18 NPT | ||
|
| ||
Pin Length Settings | 1/2”, 5/8”, 3/4”, 7/8”, 1’” | ||
| 1 | ||
Accessories | 1 | 3mm Hex Wrench | |
1 | 4mm Hex Wrench | ||
| |||
| Tool Oil | ||
Net weight | 2 lb. | ||
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no serial number. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL
INSTRUCTIONS
Failure to follow all instructions listed below may result in serious injury.
SAVE THESE INSTRUCTIONS
1.Use compressed air only: Clean, dry, regulated compressed air at no more than 100 PSI. Never use
oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
2.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
3.Use protection: Always wear ANSI- approved safety eye goggles, dust mask/respirator, work gloves, hard toed shoes, long sleeve shirt and long pants when using or servicing this Air Nailer.
4.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
5.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.
6.Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
7.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
SKU 97526 | For technical questions, please call | Page 2 |