SERVICE
1.Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk of injury.
2.When servicing, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of manual. Use of unauthorized parts or failure to follow instructions may create a risk of injury.
SPECIFIC SAFETY RULES
1.Maintain labels and nameplates on the Air Nailer. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.Maintain a safe working environment. Make sure there is adequate surrounding workspace. Do not use this product in a damp or wet location.
3.When using this Air Nailer, always maintain a firm grip on the tool with both hands to resist starting torque.
4.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the air supply or pressing the Trigger (27).
5.Never lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.
6.Never leave this Air Nailer unattended when it is plugged into an air supply. Turn off the tool, and unplug it from an air supply before leaving.
7.WARNING: This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)
SKU 97526 | For technical questions, please call | Page 4 |