8.Avoid accidental starting. Carrying power tools with your finger on the
Trigger (27) invites accidents.
9.Be sure all tools and/or attachments used with this Air Nailer are secure before plugging in or turning on the air supply.
10.Be careful when connecting/ disconnecting air supply. It is recommended to use quick disconnects (not included) rather than
11.Always disconnect the air supply when this Air Nailer is not being used.
12.Use ONLY the attachments that come with this Air Nailer. Using or altering other parts/attachments could damage this tool or cause personal injury.
13.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a moving part of the power tool may result in personal injury.
14.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.
15.Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
16.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better
SKU 97526
and safer at the rate for which it is designed. Do not force the tool and do not use the tool for a purpose for which it is not intended.
17.Do not use the Air Nailer if the Trigger (27) does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.
18.Disconnect the air supply before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. Always unplug the tool from its air supply before performing any inspection, maintenance, or cleaning procedures.
19.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. Never allow children to come in contact with this product.
20.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.
21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
Page 3