INSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING! Make sure air compressor is unplugged and that the Nailer is disconnected from its Air Supply before performing any inspection, maintenance, or cleaning procedures.
2.BEFORE EACH USE, inspect the general condition of this tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged air hoses, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
MAINTENANCE CHART
Maintenance Type | Before | After | Monthly | |
Use | Use | |||
|
| |||
Inspect the Nailer for damage | X | X |
| |
(see #2, above) |
| |||
Wipe off with clean, moist |
| X | X | |
cloth |
|
TROUBLESHOOTING
Problem |
| Possible Causes |
| Probable Solutions |
Air leak near top of | 1. | Loose screws. | 1. | Tighten screws. |
tool or in trigger area. | 2. | Worn or damaged | 2. | See qualified service technician for |
|
|
|
| repairs. |
Nailer does not | 1. | Inadequate air supply. | 1. | Check screws. |
operate or operates | 2. | Inadequate lubrication. | 2. | See qualified service technician for |
sluggishly | 3. | Worn or damaged |
| repairs. |
|
|
|
|
|
Air leak near bottom | 1. | Loose screws. | 1. | Tighten screws. |
of Nailer | 2. | Worn or damaged | 2. | See qualified service technician for |
|
| bumper. |
| repairs. |
Nailer jam frequently | 1. | Incorrect fasteners. | 1. | Check fasteners for correct size. |
| 2. | Damaged fasteners. | 2. | Replace with undamaged |
| 3. | Magazine or Nozzle screw loose. |
| fasteners. |
| 4. | Magazine is dirty. | 3. | Tighten screws. |
| 5. | Driver is worn or damaged. | 4. | Clean screws. |
|
|
| 5. | See qualified service technician for |
|
|
|
| repairs. |
Other |
|
| See qualified service technician for | |
|
|
| repairs. | |
SKU 97526 | For technical questions, please call | Page 7 |