Harbor Freight Tools 97520 operating instructions Distributed exclusively by Harbor Freight Tools

Page 1

AIR BRAD FINISH NAILER

16 GAUGE - 2”

Model 9752094481

ASSEMBLY AND OPERATING INSTRUCTIONS

Diagrams within this manual may not be drawn proportionally.

Due to continuing improvements, actual product may differ slightly from the product described herein.

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product. Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

REV 08g

Image 1
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callSafety Warnings and Precautions Product SpecificationsRead all instructions before using this tool Save this ManualSKU For technical questions, please call Page Unpacking California Health & Safety Code 25249.5, et seqOperation Testing the Full Sequential Safety Trip MechanismLoading Brads Do not exceed the maximum 120 PSI Operating the NailerClearing Jams Troubleshooting INSPECTION, MAINTENANCE, and CleaningAnytime any maintenance or repairs are done, First Please Read the Following Carefully Parts ListAssembly Diagram Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800