Operation

For best service, you should incorporate a regulator and an in-line filter and oiler as shown in the diagram below. Hoses, couplers, regulators, filters, and oilers

are all available from Harbor Freight Tools.

REGULATOR

AIR

COMPRESSOR

TO
AIR BRAD
FINISH
NAILER	FILTER	OILER

TESTING THE FULL SEQUENTIAL SAFETY TRIP MECHANISM

WARNING: Even though the Nailer should be empty during this procedure, ALWAYS point the Nailer at a piece of scrap wood when testing.

1.Make sure the tool is disconnected from its air supply.

2.Completely empty the Magazine Assembly (70) of Brads.

3.The Nailer should not fire if the Safety (50A) is not depressed against the workpiece.

4.Make sure the Trigger (36) and Safety (50A) move freely, without sticking.

Trigger (36)

Magazine Assembly

(70)

Safety (50A)

REV 08g

SKU 94481

For technical questions, please call 1-800-444-3353

PAGE 6