User-Maintenance
Instructions
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Turn off the tool, detach the air supply, safely discharge any residual air pressure in the tool, and release the Trigger before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use.
Cleaning, Maintenance, and
Lubrication
Note: Anytime inspection, maintenance and cleaning are done:
1.Disconnect the Floor Nailer from its air supply.
2.Empty the Magazine (71) complete- ly.
3.Try to fire the Nailer into a piece of scrap wood or flooring to ensure that it is disconnected and inca- pable of firing any nails/staples.
4.Inspect the air supply screen located in the End Cap (82) before each use. Clean or replace as necessary. Dirt in the air supply is a major cause of pneumatic tool wear. Use a filter in the compressed air system for better performance and longer tool life. The filter must have adequate flow capac- ity for the specific application.
5.Clean the external parts of the Nailer with a clean cloth and mild detergent or
6.Store in a clean, dry and safe location out of reach of children.
All maintenance, service or repairs not listed in this manual are only to be attempted by a qualified ser- vice technician.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
SKU 98917 | For technical questions, please call | Page 12 |