Wire collated nails

NOTE:

Before loading nails in the magazine, adjust the plate. If the magazine cover is forcibly closed without adjusting the plate correctly, the nail holder may be damaged.

(1) Grip the nail guide and knob with finger.

Press the knob down and swing the nail guide open. And open the magazine cover.

Nail guide	Knob

(2) Adjust the position of the plate according to the nail length. The nail will not feed smoothly if the plate is not correctly adjusted.

	Magazine	Magazine
		Nail holder cover
	Magazine

32mm

38mm

45.50mm

57.65mm

45 57

32 40

50 65

1Turn the nail holder about 90 degrees counterclockwise.

2 Slide in vertical direction possible.

Lift or lower the nail holder to accept different length nails.

3 Adjust the plate to the nail length reference points on the magazine cover and turn the nail holder 90 degrees clockwise until you hear "click".

Nail holder

Magazine

Magazine cover

Nails

Nail holder

First nail

Guide slot

First nail

Pawl 1 Pawl 2

Driving hole

First nail Guide slot

Pawl 1

	Guide slot for
Driving hole	Pawl 2 plastic sheet

(3)Place the nail coil into the magazine.

Uncoil enough nails to reach the driving hole.

Insert the first nail into the driving hole and the second nail between the two pawls of the feeder.

Fit the nail head in the guide slot.

Plastic sheet collated nails

Insert the first nail into the driving hole and the second nail between the two pawls of the feeder.

Fit the nail head and upper side of the plastic sheet in the guide slot.

Fit the lower side of the plastic sheet in the guide slot for plastic sheets.

– 12 –

NV 65AF3 specifications

The Hitachi NV 65AF3 is a powerful, versatile tool designed for professionals in construction and woodworking, particularly in the framing and installation of materials. This pneumatic nailer is noteworthy for its combination of advanced technology and user-friendly features that enhance efficiency and productivity on the job site.

One of the stand-out features of the NV 65AF3 is its lightweight design. Weighing in at just under 4.4 pounds, the nailer allows for ease of handling over extended periods, reducing fatigue for users. This portability is complemented by its compact size, making it suitable for tight spaces where larger tools may prove cumbersome.

The NV 65AF3 utilizes a pneumatic power source, which means it requires an air compressor to operate. This not only provides a consistent power output but also allows the nailer to deliver impressive performance in terms of driving power. The tool is capable of driving nails ranging from 1-1/4 inches to 2-1/2 inches in length, making it suitable for applications such as framing, sheathing, and roofing.

Another key feature is its adjustable depth of drive. This functionality allows users to finely tune how deep the nails are driven into the material, ensuring precision and consistency in finishing work. The tool also includes a selective actuation switch that enables users to choose between sequential and contact firing modes. The sequential mode offers greater control, making it ideal for delicate tasks, while the contact mode allows for faster nailing in production environments.

A robust magazine holds up to 100 nails, enabling longer run times between reloads. The NV 65AF3’s rear exhaust directs air away from the user and work surface, keeping the workspace clean and safe.

Durability is another hallmark of the Hitachi NV 65AF3, with its rugged construction designed to withstand the rigors of job sites. The tool also features a rubber grip handle designed for comfort and stability during use.

In conclusion, the Hitachi NV 65AF3 is an exemplary pneumatic nailer, merging portability, power, and precision. Its user-centric design and durable build make it a reliable choice for contractors seeking a high-performance tool for a wide range of applications. Whether framing, roofing, or installing wood, the NV 65AF3 delivers the reliability and efficiency professionals demand.