Hitachi NV 65AF3 Applications, Before Operation, Working Environment, AIR Supply

Page 9

APPLICATIONS

◯Construction wooden works such as floor and wall framing roof decking, and subflooring.

◯Mobile and modular home construction.

◯Making wooden boxes, pallets, and drums.

◯Packing operations in manufacturing plants, and other types of packing and crating work in general.

BEFORE OPERATION

Read section titled Safety (Page 4 - 6)

Make sure of the followings before operation.

WORKING ENVIRONMENT

WARNING

⬤No flammable gas, liquid or other flammable objects at worksite.

⬤Clear the area of children or unauthorized personnel.

AIR SUPPLY

DANGER

⬤Never use oxygen, combustible gases or any other bottled gases.

WARNING

⬤Never connect Nailer to pressure which potentially exceeds 200 psi (13.7 bar 14 kgf/cm2).

⬤Never use non relieving coupler on Nailer.

1.Power source

◯ Use only clean, dry, regulated compressed air as a power source for this Nailer.

◯ Air compressors used to supply compressed air to this Nailer must comply with the requirements of 0the latest version of ANSI Standard B 19.3 Safety Standard For Compressors For Process Industries.

◯ Moisture or oil in the air compressor may accelerate wear and corrosion in the Nailer. ◯ Drain daily.

2.Filter-Regulator-Lubricator

◯ Use a regulator with a pressure range of 0 – 120 psi (0 – 8.3 bar 0 – 8.5 kgf/cm2).

◯ Filter-regulator-lubricator units supply an optimum condition for the Nailer and extend the Nailer life. These units should always be used.

Filter

The filter removes moisture and dirt mixed in compressed air.

 

Drain daily unless fitted with an automatic drain.

 

Keep the filter clean by regular maintenance.

Regulator

The regulator controls the operating pressure for safe operation of the Nailer.

 

Inspect the regulator before operation to be sure it operates properly.

Lubricator

The lubricator supplies an oil mist to the Nailer.

 

Inspect the lubricator before operation to be sure the supply of lubricant is adequate.

 

Use Hitachi pneumatic tool lubricant.

Regulator

Nailer Side Compressor Side

Filter

Lubricator

– 9 –

Page 8 Page 10
Image 9
Page 8 Page 10
Contents NV 65AF3 Contents Important Information Definitions of Signal WordsDo not Exceed 120 psi SafetySafety Stay Alert EMPLOYER’S ResponsibilitiesName of Parts OperationAccessories SpecificationsNail Selection MIN MAXBefore Operation ApplicationsWorking Environment AIR SupplyCold Weather Care LubricationTrigger Lock Air hoseTesting the Nailer Adjusting AIR PressureLoading Nails Plastic sheet collated nails Wire collated nailsNailer Operation Methods of OperationLock lever Nose cap DrivingChanging the exhaust direction Adjusting the nailing depthCutting off the sheet Disconnect AIR Hose from NailerRead section titled Safety page 4 Maintenance and InspectionClearing a jam Inspect the feedersService and Repairs Operator troubleshooting Maintenance chartAction WHY HOW Problem Check Method Correction60 872-971 Retaining Ring for D3 Shaft 204

NV 65AF3 specifications

The Hitachi NV 65AF3 is a powerful, versatile tool designed for professionals in construction and woodworking, particularly in the framing and installation of materials. This pneumatic nailer is noteworthy for its combination of advanced technology and user-friendly features that enhance efficiency and productivity on the job site.

One of the stand-out features of the NV 65AF3 is its lightweight design. Weighing in at just under 4.4 pounds, the nailer allows for ease of handling over extended periods, reducing fatigue for users. This portability is complemented by its compact size, making it suitable for tight spaces where larger tools may prove cumbersome.

The NV 65AF3 utilizes a pneumatic power source, which means it requires an air compressor to operate. This not only provides a consistent power output but also allows the nailer to deliver impressive performance in terms of driving power. The tool is capable of driving nails ranging from 1-1/4 inches to 2-1/2 inches in length, making it suitable for applications such as framing, sheathing, and roofing.

Another key feature is its adjustable depth of drive. This functionality allows users to finely tune how deep the nails are driven into the material, ensuring precision and consistency in finishing work. The tool also includes a selective actuation switch that enables users to choose between sequential and contact firing modes. The sequential mode offers greater control, making it ideal for delicate tasks, while the contact mode allows for faster nailing in production environments.

A robust magazine holds up to 100 nails, enabling longer run times between reloads. The NV 65AF3’s rear exhaust directs air away from the user and work surface, keeping the workspace clean and safe.

Durability is another hallmark of the Hitachi NV 65AF3, with its rugged construction designed to withstand the rigors of job sites. The tool also features a rubber grip handle designed for comfort and stability during use.

In conclusion, the Hitachi NV 65AF3 is an exemplary pneumatic nailer, merging portability, power, and precision. Its user-centric design and durable build make it a reliable choice for contractors seeking a high-performance tool for a wide range of applications. Whether framing, roofing, or installing wood, the NV 65AF3 delivers the reliability and efficiency professionals demand.
Top Page Image Contents